Power your agent
Perintah milik penerbit sendiri. Bukan endpoint PlugMCP.
Host a copy with our keys and logs.
npx -y @geohar/[email protected]Claude Code tidak punya tautan instal untuk perintah lokal. Salin perintah di bawah dan jalankan di terminal.
claude mcp add geohar-opencode-mcp-combiner -- npx -y @geohar/opencode-mcp-combiner@0.23.1Jalankan di terminal.
{ "mcpServers": { "geohar-opencode-mcp-combiner": { "command": "npx", "args": [ "-y", "@geohar/[email protected]" ] } }}claude_desktop_config.json
URL remote atau perintah di mesin Anda? Perbedaan kedua cara instal
Jalankan di PlugMCP
A new server you create. It is not this listing's official endpoint. Use the publisher install when you want their URL and their credentials.
BukaDari penerbit
An MCP aggregator (combiner) and editor integration that aggregates multiple Model Context Protocol servers behind a single HTTP endpoint, with first-class CodeCompanion.nvim support.
The combiner runs standalone as a Python process — any MCP-aware client can connect to it over HTTP. The Lua plugin layer adds Neovim-specific features: tool registration, editor context, slash commands, ACP forwarding, and a status UI.
OpenCode plugin: run the mcp-combiner MCP aggregator via sharedserver and register its endpoint with OpenCode.
⚠️ The combiner was renamed
mcp-bridge→mcp-combiner. The Python package, command, and import are nowmcp-combiner/mcp-combiner/mcp_combiner; its admin tools arecombiner__*; config env vars areMCP_COMBINER_*(andMCP_COMPANION_COMBINER_URL→MCP_COMPANION_COMBINER_URL). If you ran an earlier build, seecombiner/README.mdto migrate (reinstall + a one-off OAuth re-auth). Themcp-companionrepo and Neovim plugin keep their name.
📖 Rendered documentation: docs.georgeharker.com/mcp-companion
The combiner is a FastMCP server that proxies all configured MCP servers through a single HTTP endpoint. It works independently of Neovim — any MCP client that speaks HTTP can use it.
# Install dependencies
cd combiner
uv sync --frozen
# Run the combiner
uv run python -m mcp_combiner --mcp --config ~/.config/mcp/servers.json --port 9741
# Health check
curl http://127.0.0.1:9741/health
mcpServers JSON config (VS Code / Claude Desktop format)combiner__status, combiner__enable_server, combiner__disable_server)/health endpoint with server statusInternally the combiner is a one-way layered DAG: the serve entry point
(--mcp → __main__ · asgi) wires up server, which registers the
management & request plane (meta_tools, the /sessions* REST routes,
and the tools/list + tool-call middleware) over the domain modules
(tool cache/hysteresis, proxy construction, status, schema fixes) and the
foundation (persistent connections with self-healing, sharedserver
process management, auth, the Neovim back-channel). All mutable state is
owned by runtime.CombinerRuntime and mutated only through its methods.
The mcp-combiner CLI is a pure client of the management plane; the
mockserver module is the instrumentable test upstream. Full internal
design notes live in
docs/design.md.
mcp-combiner (without --mcp) is a control CLI for a running combiner —
the same operations surface the Neovim plugin exposes:
mcp-combiner start # launch the combiner via sharedserver, attached to this shell
mcp-combiner stop # drop this shell's reference (decref)
mcp-combiner restart # bounce the whole combiner process (like :MCPRestart)
mcp-combiner status # glyph table: server, state, transport
mcp-combiner health --json # raw /health payload
mcp-combiner enable <server> # mount + connect
mcp-combiner disable <server> # unmount + disconnect
mcp-combiner restart-server <server> # hard bounce one upstream (like :MCPRestartServer)
mcp-combiner reload # re-read config, apply the diff
mcp-combiner tools # list advertised tools
mcp-combiner call myserver_echo --args '{"message": "hi"}'
mcp-combiner session status # list sessions
mcp-combiner session disable <server> --token <uuid> # per-chat filter (WIP)
mcp-combiner session allow --servers a,b --token <uuid> # allow-list (WIP)
start / stop / restartstart, stop, and restart manage the combiner's own process through
sharedserver — the native-CLI
equivalent of the Claude plugin's SessionStart hook. They are distinct from
enable/disable/restart-server, which drive an already-running combiner
over its control API.
start runs sharedserver use to launch (or attach to) the combiner and
ties the reference to the calling shell — not the short-lived CLI process —
so the combiner outlives the command and lives as long as your shell (or until
stop). It is idempotent and refcounted: a start from a second shell (or a
Neovim/Claude client) just adds a reference to the same process. --wait
(default) polls /health until ready.
stop runs sharedserver unuse to drop this shell's reference. The
combiner keeps running until the last client detaches, then stops after the
grace period (--grace-period, default 30m).
restart bounces the whole process: sharedserver admin stop --force
(graceful SIGTERM → SIGKILL, so the combiner decrefs its own downstreams first)
then a fresh use. If other clients are attached it refuses unless you pass
--force (they reconnect automatically) — mirroring :MCPRestart /
:MCPRestart!. restart-server <name>, by contrast, only bounces that one
upstream and never the combiner.
restart is the sanctioned restart, and it carries session state across:
before stopping, it arms a one-shot handover (POST /handover/prepare) —
the dying combiner parks its per-chat isolated upstream sessions without
terminating them (the backing servers keep running and keep their state)
and writes token filters, nvim binds, and per-token upstream session ids to
a mode-600 file that the successor consumes via --restore (deleted on
consume; refused if stale). A reconnecting chat that presents its grouping
token then resumes its exact upstream sessions — a stateful server like
svg-mcp still has the chat's documents, mid-conversation. Only this path
gets the handover: crashes and sharedserver admin kill boot fresh (config
start/restart accept --config (default: $MCP_COMBINER_CONFIG,
$CLAUDE_MCP_COMBINER_CONFIG, then standard locations), --name (sharedserver
name, default mcp-combiner), --port/--host, --grace-period, --pid
(override the shell PID the reference attaches to), --log-file, and --dry-run
(print the sharedserver command instead of running it). start also forwards
extra serve flags after --, e.g.
mcp-combiner start --config … -- --no-output-validation.
The session filter verbs (enable/disable/allow/clear) address a chat
by its grouping token and apply live: the token-keyed filter store is
canonical, enforcement reads through to it on the chat's next request, and the
state survives reconnects and mcp-combiner restart (it rides the handover).
With the Claude plugin's tokens this means any Claude chat is controllable
from the CLI — or from another chat — by its cc-<session-id> token (see
/sessions/map for the live roster).
The read/drive verbs (status, health, enable, …) accept --host/--port
(default 127.0.0.1:9741) or --url, and --json for scripting.
Migration note: the server is now started with an explicit
--mcpflag (mcp-combiner --mcp --config … --port …). The historical baremcp-combiner --config …invocation still serves, with a deprecation warning — add--mcpto launcher configs when convenient.
When using ACP adapters (OpenCode, Claude Code) through CodeCompanion, no manual configuration is needed — the combiner is automatically injected into the agent's session.
Any MCP client that supports HTTP transport can also connect directly for standalone use outside CodeCompanion:
# Direct HTTP access (standalone / debugging)
curl -X POST http://127.0.0.1:9741/mcp \
-H "Content-Type: application/json" \
-d '{"jsonrpc":"2.0","method":"tools/list","id":1}'
Outside CodeCompanion, install a plugin so your agent runs and registers the
combiner itself (one refcounted process shared across clients). All three plugins live
in this repo — plugins/.
Prerequisites (once, for any plugin): uv,
cargo install sharedserver, and a servers.json at
~/.config/mcp-combiner/servers.json (see MCP Server Config).
You do not need to install the combiner itself — with uv present the plugins fetch a
pinned release from PyPI on demand. Then:
/plugin marketplace add georgeharker/mcp-companion →
/plugin install mcp-combiner@mcp-companion → restart the session; verify
with /mcp (an mcp-combiner server with prefixed tools)."@geohar/opencode-mcp-combiner@latest" to your opencode.json
plugin list.@geohar/pi-mcp-combiner extension (symlink into
~/.pi/agent/extensions/, or list it under settings.json packages) — it runs
the combiner and speaks MCP to it itself (no second package).
pi-mcp-adapter is optional — the
extension auto-defers when it's present (see
plugins/pi/README.md).See plugins/README.md for the full walkthrough (config discovery order, env
knobs, troubleshooting) and the host-owned (MCP_COMPANION_COMBINER_URL)
behaviour.
The combiner reads a standard MCP servers JSON file. VS Code and Claude Desktop format is supported:
{
"mcpServers": {
"github": {
"command": "npx",
"args": ["-y", "@modelcontextprotocol/server-github"],
"env": {
"GITHUB_TOKEN": "${env:GITHUB_TOKEN}"
}
},
"filesystem": {
"command": "npx",
"args": ["-y", "@modelcontextprotocol/server-filesystem", "/home/user"]
},
"remote-api": {
"url": "https://api.example.com/mcp",
"transport": "http",
"headers": {
"Authorization": "Bearer ${env:API_TOKEN}"
}
}
}
}
By default every chat shares one persistent upstream connection to an HTTP/SSE
server, and therefore one upstream Mcp-Session-Id. A stateful server that
keys state on the session — e.g. a server that tracks a "current document" —
then sees all chats as the same session, so two concurrent chats clash.
Set "isolate": true on such a server and the combiner opens a separate
upstream session per chat (still one upstream server instance, shared
transport). The server is handed a distinct, stable Mcp-Session-Id per chat
and partitions its per-session state automatically — no clash.
stdio servers cannot be isolated.
isolateis HTTP/SSE-only: a stdio server is one subprocess with a single MCP session, so"isolate": trueon a stdio entry is ignored (with a startup warning) and all chats share its one session — a stateful stdio server therefore leaks state across chats (one global "current document" for everyone). True per-chat isolation would require spawning a subprocess per chat, which the combiner deliberately does not do (unbounded processes for a marginal case). If you need per-chat state, run the server over HTTP/SSE and setisolate: truethere — which is exactly why the stateful sibling servers (svg-mcp, cribsheet) are HTTP, not stdio.
"Per chat" is keyed by the chat's grouping token (the
X-MCP-Combiner-Session header, or a /mcp/<token> URL path — the URL form
wins when both are present). Tokens are minted outside the combiner by
whoever owns the chat, which is what makes them stable across combiner
restarts:
SessionStart hook + headersHelper bridge), so every Claude chat is
individually addressable — including through the /sessions/token/<token>
control routes (per-chat filters and, over a restart, continuity).pi-<session-id>) on its URL path (/mcp/<token>) — each Pi chat gets its own
isolated upstream identity, subagents included (each child session binds fresh);
a resumed chat continues its identity. The future option noted here previously
(owning the connection directly) is now the shipped behaviour — see
plugins/pi.A connection with no token falls back to its wire Mcp-Session-Id as the
grouping key — fine within one combiner lifetime, but that id is minted by the
combiner and dies with it, so tokenless chats do not survive a restart.
A chat's isolated upstream session moves through three tiers, driven by pure
timers (configure via a top-level "isolation" section):
grace_seconds (default 300) ago; quick reconnects
reattach instantly. An explicit session DELETE from the client skips the
grace and parks immediately.token → (Mcp-Session-Id, protocolVersion) is kept. The token's next
appearance resumes the same upstream session (state intact), falling back to
a fresh one if the server expired it.park_ttl_seconds (default 3600): the entry is
dropped and a best-effort DELETE releases the server's session state."isolation": { "grace_seconds": 300, "park_ttl_seconds": 3600 }
GET /sessions/map on the combiner shows every correlation live: tokens,
their downstream sessions, nvim binds, and the isolated live/parked tiers.
isolate is tri-state:
true — on; per-chat upstream sessions. If the server uses auth/OAuth,
the token is shared across the per-chat sessions, so it still authenticates
once (no extra browser windows).false — explicitly off (distinct from absent for layered overrides).Only applies to HTTP/SSE servers. An explicit true on a stdio server is
ignored with a warning — stdio has one session per process, so per-chat
isolation would need a subprocess per chat, which the combiner does not do.
"svg-mcp": {
"url": "http://127.0.0.1:9745/mcp",
"isolate": true // each chat gets its own document/session state
}
Many MCP servers that expose an HTTP endpoint (as opposed to stdio) need to run as standalone processes: started before the combiner connects, kept alive during the session, and shut down when no longer needed. Managing this manually is tedious — you have to remember to start them before your editor, keep them running, and clean them up afterward.
The sharedServer field solves this. It links a server entry to a process definition in
the top-level sharedServers dict. The combiner delegates lifecycle to
sharedserver, a reference-counted
process supervisor:
grace_period before
stopping — so a quick restart or a second Neovim window opening does not cause an
unnecessary restartThe result is ephemeral-but-shared server processes: they start on demand, are shared across all clients that need them, and stop themselves when idle. You never need to manually start or stop them.
The combiner waits up to health_timeout seconds for the process to become reachable
after starting before mounting the proxy. If the process was already running, this
passes immediately.
A complete example — a Google Workspace MCP server that needs OAuth and is managed via sharedserver:
{
"sharedServers": {
"google-workspace-proc": {
"command": "uvx",
"args": ["workspace-mcp", "--transport", "streamable-http"],
"env": {
"WORKSPACE_MCP_PORT": "8002",
"MCP_ENABLE_OAUTH21": "true",
"GOOGLE_OAUTH_CLIENT_ID": "${env:GOOGLE_OAUTH_CLIENT_ID}",
"GOOGLE_OAUTH_CLIENT_SECRET": "${env:GOOGLE_OAUTH_CLIENT_SECRET}"
},
"grace_period": "30m",
"health_timeout": 30
}
},
"mcpServers": {
"google-workspace": {
"url": "http://localhost:8002/mcp",
"auth": "oauth",
"sharedServer": "google-workspace-proc"
}
}
}
The sharedServers key is separate from mcpServers — it describes how to run the
process; the mcpServers entry describes how to connect to it. Multiple server
entries can reference the same sharedServers entry.
sharedServers entry fields:
All config fields support ${VAR} interpolation with optional defaults:
Expansion applies to: command, args, env, url, and headers fields.
Interpolation happens at runtime (when connecting to servers), not at config
load time.
MCP servers that require authentication are supported via the auth field.
Three modes are available:
{
"mcpServers": {
"my-api": {
"url": "https://api.example.com/mcp",
"auth": { "bearer": "${env:MY_API_TOKEN}" }
}
}
}
{
"mcpServers": {
"my-api": {
"url": "https://api.example.com/mcp",
"auth": "oauth"
}
}
}
This triggers the full MCP OAuth 2.1 flow: metadata discovery, dynamic client registration, PKCE authorization code grant via browser redirect, and token exchange.
{
"mcpServers": {
"my-api": {
"url": "https://api.example.com/mcp",
"auth": {
"oauth": {
"client_id": "my-app",
"client_secret": "${env:OAUTH_SECRET}",
"scopes": "read write"
}
}
}
}
}
When client_id is provided, dynamic client registration is skipped.
By default, tokens are persisted to ~/.cache/mcp-companion/oauth-tokens/<server>/
and reused across sessions. Refresh tokens are handled automatically.
Global caching settings live in the top-level oauth section of your config:
{
"oauth": {
"cache_tokens": true,
"token_dir": "~/.cache/mcp-companion/oauth-tokens"
},
"mcpServers": { ... }
}
Per-server override — disable caching for one server while keeping it globally:
{
"mcpServers": {
"my-api": {
"url": "https://api.example.com/mcp",
"auth": {
"oauth": {
"cache_tokens": false
}
}
}
}
}
CLI flags — override everything at startup (highest priority):
# Disable disk caching entirely (tokens lost on restart)
python -m mcp_combiner --mcp --config servers.json --no-oauth-cache
# Use a custom token directory
python -m mcp_combiner --mcp --config servers.json --oauth-token-dir /secure/tokens
# Re-enable caching if config file says otherwise
python -m mcp_combiner --mcp --config servers.json --oauth-cache
Priority order (highest to lowest): CLI flag → config oauth section → built-in default.
Some MCP servers support an "external OAuth provider" mode where the server does not run its own OAuth flow — it simply validates bearer tokens issued by the upstream identity provider (e.g. Google). In this mode the combiner holds the real OAuth token and passes it on every request. The server is stateless: it can restart freely without invalidating any sessions.
How it works:
/.well-known/oauth-protected-resource and returns
401 on unauthenticated requests.Authorization: Bearer <real-token>. The MCP server validates it against
the provider's API — no local state required.When to use this vs. standard OAuth 2.1:
Configuration example — Google Workspace MCP:
Enable external provider mode on the GWS server:
{
"sharedServers": {
"goog_ws": {
"command": "uvx",
"args": ["workspace-mcp", "--transport", "streamable-http"],
"env": {
"WORKSPACE_MCP_PORT": "8002",
"MCP_ENABLE_OAUTH21": "true",
"EXTERNAL_OAUTH21_PROVIDER": "true",
"WORKSPACE_MCP_STATELESS_MODE": "true",
"GOOGLE_OAUTH_CLIENT_ID": "${env:GOOGLE_OAUTH_CLIENT_ID}",
"GOOGLE_OAUTH_CLIENT_SECRET": "${env:GOOGLE_OAUTH_CLIENT_SECRET}"
},
"grace_period": "30m",
"health_timeout": 30
}
},
"mcpServers": {
"gws": {
"url": "http://localhost:8002/mcp",
"sharedServer": "goog_ws",
"auth": {
"oauth": {
"client_id": "${env:GOOGLE_OAUTH_CLIENT_ID}",
"client_secret": "${env:GOOGLE_OAUTH_CLIENT_SECRET}",
"callback_port": 9876
}
}
}
}
}
Google Console setup (one-time):
http://localhost:9876/callback
(use localhost, not 127.0.0.1)On first connection the combiner opens a browser tab for the Google consent
screen. After you approve it, the access and refresh tokens are cached
in ~/.cache/mcp-companion/oauth-tokens/gws/. Subsequent restarts of
GWS (or even the combiner) will silently re-use the cached token without
prompting again.
Notes:
callback_port must match the redirect URI registered in your OAuth app
exactly. Google and most providers reject unregistered URIs.GOOGLE_OAUTH_CLIENT_ID / GOOGLE_OAUTH_CLIENT_SECRET env vars are
needed by both GWS (for token validation) and the combiner (for the OAuth
flow). Use your shell environment or a secrets manager such as 1Password
CLI (op run --) to supply them.OAUTHLIB_INSECURE_TRANSPORT=1 env var is only needed when GWS itself
runs over plain HTTP (the default in local development) — it is not needed
by the combiner.Cached OAuth tokens are encrypted at rest using Fernet symmetric encryption. By default, the encryption key is derived from machine-specific identifiers (hostname + username). This provides obfuscation but not strong security — anyone with access to your home directory can derive the same key.
For stronger security, set a custom encryption key:
# Via environment variable
export MCP_COMBINER_TOKEN_KEY="your-secret-key-here"
python -m mcp_combiner --mcp --config servers.json
# Or in Neovim config
require("mcp_companion").setup({
combiner = {
token_key = "your-secret-key-here",
},
})
When you change the encryption key, existing cached tokens become unreadable and you'll need to re-authenticate with OAuth servers.
/mcp)The above is backend auth (combiner → upstream servers). Separately, the combiner's
own /mcp endpoint is unauthenticated by default — fine on loopback, but open
the moment you bind beyond 127.0.0.1. Set an inbound bearer token and every
client must present Authorization: Bearer <token>:
Combiner: MCP_COMBINER_AUTH_TOKEN env, or --auth-token-file PATH (the file
wins). Unset ⇒ open (default; nothing changes). Gates /mcp and the control
routes that mutate the server (/sessions*, /handover*); /health stays open.
A missing/wrong token gets a plain 401 — no OAuth challenge advertised. (The
mcp-combiner ctl and the Neovim host present the token automatically.)
Neovim: set combiner.auth_token (or export MCP_COMBINER_AUTH_TOKEN) — it is
passed to the spawned combiner AND presented by the plugin's own HTTP client:
require("mcp_companion").setup({
combiner = { auth_token = "…" }, -- or read from your own secret store
})
Claude Code: set MCP_COMBINER_AUTH_TOKEN in the environment you launch
claude from, as usual — but there's a subtlety worth knowing. Claude Code
redacts environment variables whose names look secret-like (contain
TOKEN/KEY/SECRET/…) before spawning a plugin's headersHelper, so the
helper that builds the Authorization header never sees MCP_COMBINER_AUTH_TOKEN
in its own environment. The plugin bridges that gap: its SessionStart hook runs
with the full (unredacted) environment, reads the token, and relays it to the
helper through a mode-600 file ($XDG_STATE_HOME/mcp-companion/cc-bearer-<pid>,
removed on session end). Net effect: one env var, bearer presented automatically.
(Since v0.13.3 — earlier versions could not authenticate a locked-down combiner
from Claude Code, because the helper's environment came up empty and Claude Code
then fell into OAuth / Dynamic Client Registration and surfaced a 404.)
OpenCode / Pi: each reads the same MCP_COMBINER_AUTH_TOKEN from its
environment and sends the bearer automatically (Pi via the
/mcp-combiner install-config command). See the per-plugin READMEs.
Backends behind the combiner (cribsheet, svg-mcp, …) are their own loopback
HTTP servers, so the combiner's bearer does not cover a local process hitting
them directly. Each can gate its own /mcp by vendoring the combiner's
inbound_auth.py (self-contained) and naming its own env var — CRIBSHEET_AUTH_TOKEN,
SVG_MCP_AUTH_TOKEN (set them to the same value for one shared secret, or distinct
for isolation). The combiner then presents that token via the backend's servers.json
entry: {"auth": {"bearer": "${CRIBSHEET_AUTH_TOKEN}"}}. See the combiner README's
Reusing the gate.
The Lua plugin connects the combiner to
CodeCompanion.nvim, exposing
MCP capabilities as native editor features.
Three kinds of traffic connect editor and combiner: each chat gets its own
token-correlated MCP session (/mcp/<token> — carried by the HTTP adapter's
lite client, the ACP mcpServers entry, or the CLI agent's environment); the
plugin's tokenless control channel drives operations and receives SSE
push; and the back-channel runs in reverse — the combiner dispatches
neovim_* tool calls into the live editor over a private msgpack-RPC socket,
so any connected agent can drive buffers, files, and diagnostics.
uvThe plugin uses sharedserver to share one combiner process across all Neovim instances, with automatic startup, health polling, idle timeout, and graceful shutdown.
Install via cargo:
cargo install sharedserver
Or let lazy.nvim build it — list georgeharker/sharedserver as a plugin entry with
a build step (see the lazy.nvim spec below). lazy.nvim will compile and install the
binary automatically on first sync.
Install sharedserver and mcp-companion as separate top-level plugin entries so lazy.nvim runs the build steps independently, then declare sharedserver as a dependency of mcp-companion so load order is correct:
-- sharedserver: builds the Rust binary that manages combiner process lifecycle
{
"georgeharker/sharedserver",
build = "cargo install --path rust",
lazy = false,
},
-- mcp-companion: the combiner + Neovim plugin
{
"georgeharker/mcp-companion",
lazy = false,
dependencies = {
"olimorris/codecompanion.nvim",
"georgeharker/sharedserver",
},
config = function()
require("mcp_companion").setup({
combiner = {
port = 9741,
config = vim.fn.expand("~/.config/mcp/servers.json"),
},
log = { level = "info", notify = "error" },
})
end,
},
Then register the CC extension in your CodeCompanion config:
require("codecompanion").setup({
extensions = {
mcp_companion = {
callback = "mcp_companion.cc",
opts = {},
},
},
})
The Python combiner runs from a venv. On setup() the plugin ensures it's installed
via uv if it isn't already. This is async, idempotent, and a no-op once installed — so no
lazy.nvim build step is needed (the plugin now runs the equivalent uv sync itself).
Where it installs — and how, which differs by who owns the venv:
combiner.venv) — the out-of-the-box mode. A plugin-local venv at
<plugin>/combiner/.venv, populated with uv sync --frozen --no-dev --inexact. Self-contained,
nothing leaks into your environment, and dependencies come from the committed uv.lock, so
you get exactly the versions the release was tested with. uv creates and manages this venv.combiner.venv = "~/.venv" (or any path) — the mode to use when developing.
Install/run from that venv, so it can be shared with other clients (see below). A
user-set venv must already exist: the plugin only uv pip install -es into it (additive)
and will never point an environment-managing command (uv sync, uv venv) at a venv it
doesn't own — that would prune packages it didn't put there. Note the tradeoff: this path
re-resolves against the index rather than the lockfile, so deps are not lock-pinned.Either way the install is editable, so edits to combiner/ take effect without reinstalling.
The plugin reinstalls only when pyproject.toml or uv.lock change (tracked by a hash stamp in
the venv), since those are what an editable install cannot pick up on its own.
combiner.python_cmd resolution order: an explicit custom path → the configured venv (once
the combiner is installed there) → the plugin-local combiner/.venv → python3.
require("mcp_companion").setup({
combiner = {
-- venv = "~/.venv", -- opt in to a shared venv (default: plugin-local)
-- python_cmd = "/path/to/python", -- pin a python and skip auto-install entirely
-- command = "/path/to/mcp-combiner", -- run a prebuilt combiner binary directly (see Nix below)
},
})
Commands: :MCPInstall installs/refreshes into the target venv (:MCPInstall! forces a
reinstall; :MCPInstall /path/to/venv targets a specific venv).
Sharing the combiner with standalone Claude Code. Only relevant if you opt into a shared
combiner.venv. Put its bin/ on PATH (or uv tool install <plugin>/combiner for a global
mcp-combiner), and the mcp-combiner
plugin will find mcp-combiner directly — Neovim and standalone Claude then share one combiner
process.
A flake.nix is provided for Nix users. Because the Nix store is read-only, the runtime
uv sync / uv pip install flow can't work — instead the flake builds the combiner ahead of
time and you point the plugin at the prebuilt executable, which skips the auto-install
entirely. The flake exposes three packages:
mcp-combiner — a Python venv with the combiner and its deps (bin/python, bin/mcp-combiner).mcp-combiner-bin — the mcp-combiner console script as a standalone app (this is default,
i.e. what nix run executes). Since v0.8.0 the bare binary is the control CLI
(nix run . -- status); serving takes the explicit flag: nix run . -- --mcp --config ….mcp-companion-nvim — the Lua/Neovim plugin. Lua only: it contains no
combiner source and no Python, so the runtime auto-install cannot work from
the read-only Nix store — you must set combiner.command (or
combiner.python_cmd) to one of the combiner packages above.Wire it up with combiner.command, pointing at the console script (the natural front door —
same main() and CLI flags as python -m mcp_combiner):
# e.g. with nixvim
extraConfigLua = ''
require("mcp_companion").setup({
combiner = {
command = "${lib.getExe pkgs.mcp-combiner-bin}", -- prebuilt binary, no uv install
port = 9741,
config = vim.fn.expand("~/.config/mcp/servers.json"),
},
})
'';
Alternatively, set combiner.python_cmd = "${lib.getExe' pkgs.mcp-combiner "python"}" — the venv
interpreter also runs -m mcp_combiner and likewise skips the auto-install. Both work;
command is the cleaner wiring because it consumes the package's advertised binary directly.
Every tool from every configured MCP server is registered as a CodeCompanion
tool. The LLM can call them directly during chat, and they appear in the tool
picker. Tools are grouped by server (@github, @todoist, etc.) and
individually addressable.
MCP resources are registered as CC editor context entries. Type
#mcp:resource_name in a chat buffer to inline a resource's content.
Optionally, resources can be auto-injected into every new chat's system prompt
(useful for guidance documents like basic-memory's "ai assistant guide").
MCP prompts become CC slash commands. Type /mcp:prompt_name in a chat buffer
to invoke a prompt. If the prompt defines arguments, you are prompted to fill
them in before the prompt messages are injected into the chat.
A built-in neovim native server exposes your live editor to an agent as
neovim_* tools (open files, read/edit buffers, diagnostics, navigation), with
risk-tiered approval and multi-instance targeting. Works in CodeCompanion chats
and for external agents (Claude Code, OpenCode) connected through the combiner.
See Controlling Neovim from an agent.
When using an ACP adapter (OpenCode, Claude Code), the combiner is automatically
injected into the ACP session via session/new. The agent connects to the
combiner directly over HTTP (or via mcp-remote stdio fallback) and can call
all MCP tools autonomously without extra configuration.
The injection adapts to however the adapter's mcpServers is configured in
CodeCompanion:
Most ACP adapters ship with defaults.mcpServers = {}. Some (e.g. Copilot ACP)
use "inherit_from_config" to pick up servers from the global CC MCP config.
Both paths are handled automatically — no adapter-specific configuration is
needed.
Note: Upstream
transform_to_acp()only translates stdio-type servers. Our patch also translates HTTP servers fromconfig.mcp.serversthat are listed inconfig.mcp.opts.default_servers, so they are not silently dropped for ACP agents.
Individual servers can be hidden from the agent for the current chat session
using /mcp-session — see Per-session server gating.
Scope: this approval chain applies to in-process CodeCompanion chats only — i.e. when CodeCompanion is the host running the LLM inside Neovim. External ACP / CLI agents (Claude Code, OpenCode, Copilot, …) do NOT use it — they are their own MCP host and enforce tool permissions on their side. See Approval for external agents below.
In a CodeCompanion chat, tool calls go through a configurable approval chain before execution:
auto_approve = true or a custom function (applies
to every tool)..mcp-companion.json auto_approve.<server> → plugin-level
(autoApprove in servers.json for proxied; native_servers.<name>.auto_approve
for native).vim.ui.select ("Allow" / "Deny")When an external agent reaches the combiner — over ACP (Claude Code, OpenCode via
CodeCompanion) or as a directly-configured MCP client — by default the combiner
does not approve anything. This is standard MCP: a server (the combiner is one)
executes the tools/call it receives; consent is the host/client's
responsibility. So tool permissions for these agents are normally configured
in the agent itself, not in mcp-companion. That governs every tool the agent
can reach through the combiner, including the neovim_* tools.
Opt-in exception: the combiner can enforce its own allow / deny / elicit policy on top of the agent's — useful when the agent's model is coarse, when one policy should follow a server across every agent, or when you want an interactive prompt for specific tools regardless of client. Off by default; see Combiner-side tool-call permissions.
For example, to make Claude Code always prompt before any neovim write/exec
tool, add an ask rule like mcp__mcp-companion__neovim_edit_buffer (or a
broader pattern) in its settings.json per the linked docs.
Beyond that opt-in policy, the combiner's controls are exposure, not approval: per-session server gating (
/mcp-session,.mcp-companion.json) and theexectier being off by default (native_servers.neovim.expose_exec). Combine those with the agent's permission rules above.
autoApprove (proxied, in servers.json) and native_servers.<name>.auto_approve
(native, in plugin setup) share one spec:
true — auto-approve all tools from the server.false / [] — auto-approve none (always prompt).string[] — a list of match tokens; a tool is approved if any matches:
"read_*", "get_*", "open_file", "*".tier:<tier> alias — matches any tool of that internal risk tier
(read / navigate / write / exec). Only native tools carry a tier, so
tier:* tokens are no-ops for proxied servers.function(tool_name, server_name, ctx) -> boolean (native config only).The built-in neovim server defaults to { "tier:read", "tier:navigate" } — so
reads and navigation auto-approve while writes/exec prompt. Override it, e.g.
auto_approve = { "tier:read", "edit_buffer" } or auto_approve = true.
Unlike the agent-side approval above, this is the combiner gating calls itself —
opt-in, and off by default. With no permissions block anywhere the combiner
approves nothing of its own and behaves exactly as before this feature existed; add
one and it enforces an allow / deny / elicit policy on the tools you name,
independent of (and on top of) the agent's own rules.
Configure it globally at the top level of servers.json and/or per server (the
per-server block overrides and extends the global one):
{
"permissions": {
// global — applies to every server
"default": "allow", // action when no pattern matches (default: allow = off)
"elicitUnavailable": "deny", // fallback when a call resolves to elicit but the
}, // client can't prompt (default: deny, secure)
"mcpServers": {
"github": {
"url": "…",
"permissions": {
// per-server — overrides/extends the global
"deny": ["*_delete", "delete_*"], // rejected — never runs
"elicit": ["create_*", "merge_*"], // prompt the user each call
"allow": ["get_*", "list_*", "search_*"], // always runs
},
},
},
}
<server>_
prefix) — the same fnmatch semantics as toolFilter.deny > elicit > allow > default.allow — the call proceeds.deny — rejected with a ToolError (isError: true); the upstream server is
never invoked.elicit — the combiner prompts the user via MCP elicitation with Allow
once / Allow for session / Deny. "Allow for session" is cached per
session so the tool isn't re-prompted; a declined or cancelled prompt is a
ToolError.elicitUnavailable — when a call resolves to elicit but the client has no
elicitation capability, apply this instead of hanging on a prompt nobody can
answer: deny (default, secure) or allow. Global or per server.default / elicitUnavailable left
unset inherit the global value; the allow/deny/elicit pattern sets are the
union of global + server (plus the server's autoApprove list, which folds
into the allow-set).Off by default, provably. With no permissions and no per-server block the
resolved policy is default: allow with empty deny/elicit sets — which the
combiner detects as inactive and skips entirely, so the call path is byte-for-byte
identical to a build without the feature. Turning on a server's autoApprove adds
allow patterns but never activates the gate on its own.
Scope: gates tool calls only — never tool publication (tools still list
normally). The combiner meta-tools (combiner__*) and the built-in neovim_*
tools are exempt.
When sharedserver is available, the Neovim plugin calls:
sharedserver use mcp-combiner --grace-period <idle_timeout> --pid <nvim-pid> \
-- python -m mcp_combiner --config <path> --port <port>
Multiple Neovim instances share the same combiner on 127.0.0.1:9741. When
the last Neovim instance exits (or calls get_combiner().stop()), the combiner stays
alive for idle_timeout in case another instance reconnects, then shuts down.
Without sharedserver, the combiner starts directly via vim.uv and lives for
the lifetime of the Neovim instance.
Capabilities are polled at a configurable interval. When MCP servers add, remove, or change tools/resources/prompts, the plugin re-registers everything in CodeCompanion automatically.
:MCPStatus opens a floating window showing combiner state, connected servers,
and tool/resource/prompt counts. Servers can be expanded/collapsed, and a log
view is available. :MCPRestart restarts the combiner. :MCPLog opens the log
file.
Each server shows a lifecycle state reported by the combiner (also returned by
the combiner__status meta-tool, so the UI and the agent never disagree):
The state is decoupled from the volatile "does this server return tools right now" heuristic: a server that is only transiently absent (mid-reconnect, a quick restart) keeps its last-known tools for a short grace window rather than flickering out of the list.
The combiner exposes management tools that the LLM can call:
combiner__status — list all configured servers and their statecombiner__enable_server / combiner__disable_server — toggle servers globally (all sessions)combiner__session_disable_server / combiner__session_enable_server — toggle a server for the calling session onlyAll MCP tools are available as CC tools. The LLM can call them automatically,
or you can reference them with @server_name to include all tools from a
server:
@github Create an issue titled "Bug report" in my repo
Individual tools are also accessible by their full key (server__tool_name).
#mcp:basic-memory://ai-assistant-guide Tell me about the codebase
/mcp:summarize-project
If the prompt requires arguments, you will be prompted to enter them.
When you use an ACP adapter in CodeCompanion, the combiner is automatically
forwarded to the agent via session/new. The agent connects to the combiner
directly and can call all MCP tools autonomously:
You: Use the todoist tool to list my tasks for today
Agent: [calls todoist_get_tasks autonomously via combiner]
vim.keymap.set("n", "<leader>ms", "<cmd>MCPStatus<cr>", { desc = "MCP status" })
The status window shows combiner state, connected servers, and tool/resource/prompt counts. Key bindings:
The three toggle keys (e, p, S) form a hierarchy from broadest to
narrowest scope:
e — global, persists in the combiner for every session.p — per-project, persists across Neovim restarts via .mcp-companion.json.S — per-chat, lives only as long as the chat session.A server hidden by the project file shows [project off]; one hidden by a
session toggle shows [session off]. The same key that hid it (p or S)
restores it. S requires :MCPStatus to have been opened from a
CodeCompanion chat buffer (so it knows which chat to scope the toggle to).
MCP companion writes logs to two locations:
Use :MCPLog to open the plugin log directly in a Neovim buffer.
The combiner file log is enabled by default. Configure it via combiner.log —
same shape as the top-level log table:
require("mcp_companion").setup({
log = { level = "warn", file = true }, -- top-level (Lua side)
combiner = {
log = {
level = "debug", -- trace | debug | info (default) | warn | error
file = "/path/to/mcp-combiner.log", -- true (default path), string (explicit), false (disabled)
},
},
})
Defaults are level = "info" and file = true (resolves to
stdpath("log")/mcp-combiner-py.log). At level = "debug" the upstream
httpx, httpcore, mcp.client.auth, and fastmcp.client.auth loggers
also flip to DEBUG so refresh requests, metadata-discovery URLs, and HTTP
request/response detail are captured. Restart the combiner after changing
either setting (:MCPRestart!).
When the combiner is managed by sharedserver,
sharedserver writes its own logs to $XDG_RUNTIME_DIR/sharedserver (or /tmp/sharedserver if
XDG_RUNTIME_DIR is not set).
OAuth tokens are cached at ~/.cache/mcp-companion/oauth-tokens/<server>/.
-- Start/stop combiner explicitly
require("mcp_companion").get_combiner().start()
require("mcp_companion").get_combiner().stop()
-- Check status
local status = require("mcp_companion").get_combiner().status()
-- Listen to events
require("mcp_companion").on("combiner_ready", function()
print("Combiner connected!")
end)
require("mcp_companion").setup({
combiner = {
port = 9741, -- combiner HTTP port
host = "127.0.0.1", -- combiner host
config = nil, -- path to MCP servers JSON (auto-detected)
python_cmd = nil, -- path to Python (auto-resolved from .venv)
idle_timeout = "30m", -- sharedserver grace period
startup_timeout = 30, -- seconds to wait for combiner health
request_timeout = 60, -- default MCP request timeout in seconds
token_key = nil, -- encryption key for OAuth tokens (or use MCP_COMBINER_TOKEN_KEY env)
log = {
level = "info", -- "trace" | "debug" | "info" | "warn" | "error"
file = true, -- true = default path, string = explicit path, false = disabled
},
token_in_url = nil, -- nil (default) = auto: ON for ACP agents, OFF for the HTTP-adapter
-- client; true = always embed token in URL; false = header-only.
-- See Troubleshooting below.
-- Tri-state control of the combiner's JSON-schema (re)validation of proxied tool calls
-- (the upstream server already validates). nil = leave combiner default; false = force off;
-- true = force on. The meaningful win is output_validation = false, which removes the
-- redundant per-call output validation that is measurably slow for large structured responses.
output_validation = nil, -- nil | false | true (--[no-]output-validation)
input_validation = nil, -- nil | false | true (--[no-]input-validation)
},
global_env = {}, -- extra environment variables passed to the combiner process
log = {
level = "warn", -- file log level: "debug", "info", "warn", "error"
notify = "error", -- vim.notify level (default: errors only)
file = true, -- write to ~/.local/state/nvim/mcp-companion.log
},
auto_approve = false, -- true, false, or function(tool, server, ctx) -> bool
system_prompt_resources = nil, -- true (all), or {"pattern1", "pattern2"} to match
cc = {
-- Controls which MCP tool groups are added to new chats automatically.
-- true (default): add the aggregate @mcp-combiner group (all servers, one context entry)
-- false: do not auto-add; user manually @-mentions groups in each chat
-- string[]: add only the named per-server groups, e.g. {"github", "filesystem"}
auto_http_tools = true,
-- true (default): inject combiner as MCP server into ACP agent sessions
-- false or {}: inject combiner but disable all servers by default (use /mcp-session to enable)
-- string[]: inject combiner but only expose the named servers, e.g. {"github"}
auto_acp_tools = true,
-- Per-session server filter for CodeCompanion CLI agents (codecompanion.interactions.cli).
-- The CLI agent connects back to the combiner via its own MCP config; this controls which
-- servers the combiner exposes on the per-session token.
-- true (default): all servers visible to the CLI session
-- false or {}: no servers visible (per-token filter set to empty)
-- string[]: only the named servers, e.g. {"github"}
auto_cli_tools = true,
-- Whether to add per-tool natural-language system messages alongside the tools array.
-- true (default): helps models that ignore JSON-Schema descriptions.
-- false: saves tokens (descriptions duplicate the schema's `description` fields).
-- Overridden per-project by .mcp-companion.json.
tool_system_prompts = true,
-- Normalize tool JSON schemas to fix providers (e.g. moonshot-ai/kimi) that reject
-- schemas where `type` and `anyOf` coexist at the same level with a 400 error.
-- The transformation is semantically equivalent and accepted by lenient validators.
-- Passed to the combiner as --normalize-schema; applies at cache-fill time. Default false.
normalize_schema = false,
-- Per-adapter overrides for auto_http_tools / auto_acp_tools / auto_cli_tools.
-- Keys are adapter names (chat.adapter.name, e.g. "moonshot-ai", "claude", "copilot_acp")
-- or CLI agent names (e.g. "claude_code", "gemini_cli").
-- Values override the corresponding top-level setting for sessions using that adapter/agent.
-- Further overridden per-project by .mcp-companion.json#/adapters/<name>.
adapters = {
-- ["moonshot-ai"] = { auto_http_tools = { "github" }, auto_acp_tools = { "github" } },
-- ["claude_code"] = { auto_cli_tools = { "github", "filesystem" } },
},
},
ui = {
enabled = true,
width = 0.8, -- fraction of screen
height = 0.7,
border = "rounded",
},
on_ready = nil, -- fun(combiner) called when combiner connects
on_error = nil, -- fun(err) called on combiner errors
})
-- Approve everything
auto_approve = true
-- Approve specific tools
auto_approve = function(tool_name, server_name, ctx)
-- Auto-approve all read-only tools
if tool_name:match("^get_") or tool_name:match("^list_") then
return true
end
return false -- prompt for everything else
end
-- Inject all MCP resources into every new chat's system prompt
system_prompt_resources = true
-- Inject only matching resources
system_prompt_resources = { "ai%-assistant%-guide", "project%-context" }
When using a standard HTTP/LLM adapter (not ACP), MCP tools are available via
@-mention in CodeCompanion chats. Two levels of granularity are supported:
With cc.auto_http_tools = true (the default), @mcp-combiner is added
automatically to every new chat and all servers are enabled on the combiner for
that session. With false, no tool groups are added and all servers are
disabled on the combiner — use /mcp-session or type @mcp__<server> manually
to enable tools on demand.
-- Default: all servers enabled automatically as a single group
cc = { auto_http_tools = true }
-- Opt-in only: type @mcp-combiner or @mcp__github manually in each chat
cc = { auto_http_tools = false }
-- Selective: auto-enable specific servers only
cc = { auto_http_tools = { "github", "filesystem" } }
You can also hide individual servers mid-conversation with /mcp-session —
see Per-session server gating below — or commit
per-project defaults to a .mcp-companion.json file (see
Per-project defaults below).
When using an ACP adapter (OpenCode, Claude Code, Cline), the combiner is
injected as a single MCP server entry into the agent's session/new call.
The agent discovers tools directly from the combiner — @-mention and tool
groups are not used.
cc.auto_acp_tools controls whether and which servers the combiner exposes to ACP
agents:
cc = {
auto_acp_tools = true, -- (default) all servers visible
auto_acp_tools = false, -- combiner injected, but no servers enabled by default
auto_acp_tools = {}, -- same as false
auto_acp_tools = { "github", "filesystem" }, -- only these servers visible
}
When auto_acp_tools is false, {}, or a list, the combiner is still injected but unlisted
servers are automatically session-disabled for the ACP agent's combiner
connection once it is established. The filter is applied via the combiner's
REST session API and cleaned up when the chat closes.
Per-session server gating allows selectively hiding individual upstream
MCP servers from the ACP agent mid-conversation, without affecting other open
chats — see Per-session server gating below.
Per-project defaults can also be checked into a .mcp-companion.json file
(see Per-project defaults).
codecompanion.interactions.cli opens a terminal-backed window that runs an
external CLI agent (e.g. claude_code, gemini_cli) and is a third category
distinct from both HTTP CC chats and ACP CC chats:
tool_registry and the LLM sees them via the tools array.session/new
call (mcpServers), and the agent's own MCP client connects back to the
combiner.:MCPStatus and
/mcp-session gating.cc.auto_cli_tools controls the combiner-side filter for CLI sessions:
cc = {
auto_cli_tools = true, -- (default) all servers visible
auto_cli_tools = false, -- per-token filter set to empty
auto_cli_tools = {}, -- same as false
auto_cli_tools = { "github", "filesystem" }, -- only these servers visible
}
Because the CLI tool only sees the combiner via its own config, you must:
~/.claude/mcp.json or equivalent), pointing at http://127.0.0.1:9741/mcp
with your combiner port.combiner.token_in_url = true and arrange for the CLI tool's
config to embed the token (advanced; most users don't need this).Without step 1 the CLI tool will not see the combiner at all regardless of
auto_cli_tools. With step 1 but no token plumbing, the CLI tool connects
to the combiner's singleton endpoint (no per-token filter), so auto_cli_tools
becomes informational rather than enforced.
Per-session gating (/mcp-session), per-adapter overrides via cc.adapters,
and per-project overrides via .mcp-companion.json all work for CLI sessions
exactly as they do for HTTP chats — the adapters.<name> key in
.mcp-companion.json uses the CLI agent name (agent_name from
config.interactions.cli.agents).
/mcp-session lets you hide or restore individual MCP servers for the current
chat session only. It works identically with both ACP and non-ACP (HTTP/LLM)
adapters:
/mcp-session
A picker lists all connected servers with their current session status
([ON] / [OFF]). Selecting a server toggles it for the current chat only.
What happens on toggle:
notifications/tools/list_changed
signal and sees the updated tool list immediately.OpenCode plugin: run the mcp-combiner MCP aggregator via sharedserver and register its endpoint with OpenCode.
{ "mcpServers": { "geohar-opencode-mcp-combiner": { "command": "npx", "args": [ "-y", "@geohar/[email protected]" ] } }}Tool
Belum ada daftar tool. Server remote mendapatkannya setelah pemeriksaan kesehatan pertama.
FAQ
Salin konfigurasi stdio untuk Cursor, Claude Desktop, Claude Code, atau VS Code di halaman ini. Konfigurasi ini memakai instalasi dari penerbit, bukan proxy PlugMCP.
Tidak ada variabel lingkungan wajib yang tercantum di catatan ini.
@geohar/opencode MCP Combiner berjalan secara lokal melalui stdio.
Terakhir diperiksa 2026-11-15. OpenCode plugin: run the mcp-combiner MCP aggregator via sharedserver and register its endpoint with OpenCode.