- name
SKILL.md
스킬 파일은 게시자의 저장소에 그대로 있습니다.
복사한 명령을 터미널에 붙여넣습니다. 이 SKILL.md가 해당 에이전트에 설치됩니다.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-configure-code-interfaces -a cursor -y복사한 명령을 터미널에 붙여넣습니다. 이 SKILL.md가 해당 에이전트에 설치됩니다.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-configure-code-interfaces -a claude-code -y복사한 명령을 터미널에 붙여넣습니다. 이 SKILL.md가 해당 에이전트에 설치됩니다.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-configure-code-interfaces -a codex -y복사한 명령을 터미널에 붙여넣습니다. 이 SKILL.md가 해당 에이전트에 설치됩니다.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-configure-code-interfaces -a grok -y복사한 메시지를 Grok Bot 채팅에 보냅니다. Bot이 GitHub에서 이 SKILL.md를 가져와 모든 Bot이 공유하는 스킬에 추가합니다.
Install this skill: https://github.com/matlab/simulink-agentic-toolkit/tree/HEAD/skills-catalog/code-generation/simulink-configure-code-interfaces게시자 제공
Configure how model elements map to generated code — storage classes for elements in models configured with data interface configuration, and service interfaces for elements in models configured with service interface configuration.
Prerequisite: For full functionality of the skill (such as function mapping, specifying the deployment type, and using service interface configuration),
the model needs to be configured with the ERT system target file (SystemTargetFile = "ert.tlc", or an ERT-based derivative such as ert_shrlib.tlc or a vendor ERT target). When the model is configured with the GRT system
target file (SystemTargetFile = "grt.tlc"), only basic configuration operations such as specifying the storage class of model elements are supported. To configure the model with the ERT system target file, use the neighboring skill simulink-configure-model-for-code-generation.
Requires:
Simulink.Parameter or Simulink.Signal), that is a different workflow — see references/code_mapping.md, which also covers the one case that must be configured on the object..h or its definition in a designated .c file. These requests map model elements to storage classes even when the user never explicitly says "storage class" or "code mapping".mFunctions_startup".simulink-configure-model-for-code-generation.building-simulink-models.simulink-customize-a2l (coder.asap2.*). This skill owns the model-side calibration attributes that code mappings carry (Export, CalibrationAccess, BitMask, CompuMethod, DisplayIdentifier, Format) and that the A2L export then reads; it does not edit the A2L file.hdlcoder.* APIs and generates VHDL/Verilog.coder.mapping.* or coder.dictionary.*. The generated code is still C or C++, but uses different mapping APIs. For example, when the API surface is one of these:
autosar.api.*). For authoring a Classic AUTOSAR software component — including its port, data, and service interface configuration — use the skill simulink-author-classic-autosar-swc.SystemTargetFile = "ert.tlc" and CodeInterfacePackaging = "C++ class").This skill covers C Data Interface configuration when using Simulink Coder or Embedded Coder. The skill also covers C Service Interface configuration when using Embedded Coder.
introspect_api, find(cm,...), model_read/model_query_params, getModelParameter/getDeploymentType/getDataStore, coder.dictionary/coder.mapping getters — are safe. Run them freely to diagnose, detect mode, and verify; never stop to ask before a read. The confirmation gate below applies only to writes (save_system, slbuild, addEntry/set(entry,...)).introspect_api (in scripts/) BEFORE assigning any storage class, service, deployment type, or per-element property. It returns allowed values, valid properties, and the current mode (DataInterface vs ServiceInterface). This is a required first step — do NOT discover valid values by trial-and-error or repeated probing calls. Enumerate first, then set the value you learned is valid.save_system or slbuild (or set GenCodeOnly and build) without explicit user confirmation. Saving overwrites the user's model/dictionary on disk; building can be long-running and writes generated code. Configure the mappings, report exactly what you changed, ask, and wait for a yes.addEntry/set(entry,...) until the user provides the actual values (pragmas, storage classes, interface entries encode project intent).EmbeddedCoderDictionary only, and only through model_edit (a configure op on config:<ModelName>). Never set DataDictionary to bring in a coder dictionary — it fails silently, leaving the model resolved to DataInterface. Do not reach for set_param/get_param on either parameter. See references/coder_dictionary.md.references/simulink-configure-code-interfaces.md — mode selection, per-mode workflows, deployment types, per-model mappings in a model-reference hierarchy, and the end-to-end "fresh model → generated code" spinereferences/code_mapping.md — coder.mapping.* API: storage-class mechanisms, port/state mapping, function naming/prototypes, silent-failure detection and verification patternsreferences/coder_dictionary.md — coder.dictionary.* API: creating/linking dictionaries, entries and their properties (getAvailableProperties), communication methodsCopyright 2026 The MathWorks, Inc.
Use the skill to control and verify the code interface configuration of your model — how Simulink® model elements are represented in the generated C or C++ code.
---name: simulink-configure-code-interfacesdescription: Use the skill to control and verify the code interface configuration of your model — how Simulink® model…---# skills-catalog/code-generation/simulink-configure-code-interfaces/SKILL.mdFAQ
게시자에게서 skills-catalog/code-generation/simulink-configure-code-interfaces/SKILL.md를 다운로드하거나 경로를 복사해 저장소를 엽니다. PlugMCP는 스킬을 목록에 올릴 뿐 파일을 호스팅하지 않습니다.
게시자가 https://github.com/matlab/simulink-agentic-toolkit에서 관리합니다.
Claude, Cursor, Codex, Grok Build는 게시자의 저장소에서 추가한 SKILL.md를 읽을 수 있습니다. Grok Bot은 채팅에서 스킬의 GitHub 폴더 링크를 보내면 설치합니다.
setModelParameter), even on GRT; never set .StorageClass on the object. External parameter object (base workspace or data dictionary) → .StorageClass on the object; setModelParameter cannot address it. See references/code_mapping.md.