Engine-neutral game audio technique: bus layout, volume sliders in decibels, loudness, ducking music under dialogue, adaptive music and SFX variation, with Godot, Unity and FMOD/Wwise mappings. Use when mixing a game, making music react to combat, fixing repetitive footsteps or beat sync, or a mix that clips or pumps. Not for the Godot audio API (`godot-audio`).
Audio design
Game audio is a mixing graph plus a music system. Every sound plays into a small set of buses
that the settings sliders and ducking act on, and music reacts to play through layers and
segments instead of one loop. This skill owns those decisions; godot-audio, Unity's
AudioMixer or FMOD/Wwise supply the API.
When to use
Design a bus layout, volume sliders, group effects and a loudness target.
Duck music and ambience under voice or big impacts.
Build adaptive music, SFX variation, or beat-quantized gameplay.
Not this skill: Godot node, bus and stream API questions go to godot-audio; settings menu
layout goes to game-ui-ux; triggering sounds from hits goes through game-feel's feedback
bundle.
Workflow
Inventory first. List every player or AudioSource and the bus or mixer group it
outputs to; anything on Master or with no group bypasses the sliders.
Lay out buses: Master ← Music ← MusicDuck, SFX, Ambience, UI, Voice. Sliders map
to bus gain; nobody sets per-clip volumes by hand.
Map sliders to decibels: square the 0..1 slider, convert with linear_to_db, mute at 0.
Set headroom and a loudness target: true peak at or below -1 dBTP; integrated loudness
about -24 LUFS (±2) for console/PC on TV or speakers and about -18 LUFS (±2) for handheld and
mobile. Streaming-music targets such as -14 LUFS are not game targets.
Duck music under voice with a sidechain compressor or by tweening a dedicated duck bus.
Make music adaptive: vertical layers for intensity, horizontal segments switched on bar
lines for state changes, stingers for one-off events (see the reference).
Vary repeated SFX with sample pools and small pitch and volume offsets.
Measure, then listen. Capture a representative 2-5 minute session and meter it:
Godot: xvfb-run -a godot --path . --write-movie capture.avi --fixed-fps 60 --quit-after 9000
(needs a renderer; Movie Maker crashes under --headless). Other engines: ask the user to
record the game's output to a WAV and share the path.
ffmpeg -hide_banner -nostats -i capture.avi -vn -af ebur128=peak=true:framelog=quiet -f null -
prints integrated loudness (I:) and true peak (Peak:). Compare with step 4.
Then ask the user to listen on headphones and speakers and report whether ducking is
audible but not pumping and whether music transitions land on the beat.
Patterns
Snippets are Godot 4.7 GDScript; the Unity 6.3 LTS and middleware equivalents follow each one.
1. Bus routing and slider-to-gain mapping
# Route sounds to named buses; control GROUPS, not individual clips.
sfx_player.bus = &"SFX"
music_player.bus = &"Music"
# Map a 0..1 settings slider to bus gain. Squaring the slider first spreads the
# audible change over the whole travel; a raw linear-amplitude slider puts most of
# the change in the bottom fifth.
func set_bus_volume(bus_name: StringName, slider01: float) -> void:
var idx := AudioServer.get_bus_index(bus_name)
var gain := clampf(slider01, 0.0, 1.0)
AudioServer.set_bus_mute(idx, gain <= 0.0) # true silence at 0
AudioServer.set_bus_volume_linear(idx, gain * gain) # = set_bus_volume_db(idx, linear_to_db(gain * gain))
# WRONG: AudioServer.set_bus_volume_db(idx, slider01): "0.5" is +0.5 dB (no audible
# change) and 0 is 0 dB (full volume).
Unity 6.3 LTS: expose the group's Volume as a mixer parameter, then
mixer.SetFloat("MusicVolume", 20f * Mathf.Log10(Mathf.Max(gain * gain, 0.0001f))) (the mixer
floor is -80 dB). An AudioSource whose Output group is empty plays outside your mixer groups,
so no category slider or snapshot affects it: route every source.
2. Ducking via sidechain (music dips under voice)
A compressor on the music bus, keyed by the voice bus, lowers the music while dialogue plays and
releases afterwards. Starting values: threshold about -30 dB on the voice signal, ratio 4:1 to
8:1, attack as fast as the effect allows (up to ~10 ms), release 300-500 ms.
# Godot 4.7: AudioEffectCompressor reads its sidechain bus for threshold detection.
func _ready() -> void:
var duck := AudioEffectCompressor.new()
duck.sidechain = &"Voice" # the bus that triggers the dip
duck.threshold = -30.0 # dB, range -60..0
duck.ratio = 8.0 # range 1..48
duck.attack_us = 2000.0 # MICROseconds, range 20..2000 (2 ms is the maximum)
duck.release_ms = 400.0 # milliseconds, range 20..2000
AudioServer.add_bus_effect(AudioServer.get_bus_index(&"Music"), duck)
# No-compressor alternative: tween a dedicated "MusicDuck" bus that sits between
# Music and Master, so ducking never overwrites the player's Music slider.
func duck_music(active: bool) -> void:
var idx := AudioServer.get_bus_index(&"MusicDuck")
var from := AudioServer.get_bus_volume_db(idx)
var to := -12.0 if active else 0.0
create_tween().tween_method(
func(db: float) -> void: AudioServer.set_bus_volume_db(idx, db), from, to, 0.25)
Unity 6.3 LTS: add a Duck Volume effect to the Music group and a Send effect on the Voice
group targeting it. FMOD Studio and Wwise have sidechain/auto-ducking on buses; prefer those over
script tweens when the project already uses middleware.
3. SFX variation (kill the "machine gun" repeat)
# Godot 4.7: AudioStreamRandomizer picks a take (no immediate repeats by default)
# and randomizes pitch and volume on every play. No per-shot node allocation.
func make_footsteps(samples: Array[AudioStream]) -> void:
var rnd := AudioStreamRandomizer.new()
for s in samples:
rnd.add_stream(-1, s) # -1 appends; optional third arg = weight
rnd.random_pitch_semitones = 1.0 # up to +/-1 semitone (about 6%)
rnd.random_volume_offset_db = 2.0 # up to +/-2 dB
$Footsteps.stream = rnd
$Footsteps.max_polyphony = 4 # overlapping steps without new players
Unity 6.3 LTS: put the takes in an Audio Random Container asset (Random or Shuffle playback,
Avoid Repeating Last, volume and pitch randomization) and assign it to the AudioSource's
Audio Resource (AudioSource.resource); with Manual trigger each Play() picks a new take. For
full script control, keep an array of clips, pick one that differs from the last, set pitch in
a small range, and call PlayOneShot on a pooled AudioSource.
4. Beat-synced events (quantize to the music grid)
# Schedule gameplay/visuals on musical time, not frame time, so they land on beat.
const BPM := 120.0
const SECONDS_PER_BEAT := 60.0 / BPM
# What the player HEARS now: playback position, plus time since the last mix
# (the position only updates once per mixed chunk), minus output latency.
func song_time() -> float:
return ($Music.get_playback_position() + AudioServer.get_time_since_last_mix()
- AudioServer.get_output_latency())
func current_beat() -> int:
return floori(song_time() / SECONDS_PER_BEAT) # negative means beat 0 is not audible yet
# Quantize an action to the NEXT beat boundary instead of firing immediately.
func time_until_next_beat() -> float:
var time := song_time()
if time < 0.0:
return -time # pre-roll: wait for the first audible beat
return SECONDS_PER_BEAT - fposmod(time, SECONDS_PER_BEAT)
# At an exact non-negative beat boundary, NEXT means one full beat later.
Unity 6.3 LTS: read AudioSettings.dspTime and schedule with AudioSource.PlayScheduled(dspTime)
for sample-accurate starts.
Gotchas
Slider values used as dB.set_bus_volume_db(idx, 0.5) is +0.5 dB, and 0 is full volume.
Convert, and square or cube the slider first: a raw linear-amplitude slider barely changes over
most of its travel and then drops off at the bottom.
Sources that bypass the mix. A Unity AudioSource with an empty Output, or a Godot player
left on Master, ignores the category sliders and snapshots.
Ducking that overwrites the player's slider. Tweening the Music bus back to 0 dB discards
their setting. Duck a separate bus between Music and Master, or use the compressor.
Godot attack_us is in microseconds (20-2000), while release_ms is milliseconds; a value
of 10 means 10 µs, not 10 ms.
Pumping. A fast release or high ratio makes the music audibly breathe after every line.
Lengthen release (300-500 ms) or lower the ratio.
Clipping the master. Summed sounds pass 0 dBFS and distort. Leave headroom; a limiter on
Master is a safety net, not the mixer.
Beat sync from frame time drifts within seconds. Use the playback position, plus time since
the last mix, minus output latency (Unity: AudioSettings.dspTime and PlayScheduled).
Stems started by separate players drift apart over a long loop. Use one synchronized
stream (Godot AudioStreamSynchronized) or middleware.
Bar-quantized switches on AudioStreamWAV never quantize: only Ogg Vorbis and MP3 streams
carry bpm and bar_beats for AudioStreamInteractive.
Unbounded one-shot players leak and stack. Use max_polyphony, a randomizer stream, or a
pool; free on finished.
Measuring in the editor with the meters alone. Editor meters show peak per bus, not
integrated loudness over a session; meter a capture as in step 8.
References
references/adaptive-music.md: read when building layered or segmented music (stem sync,
bar-quantized switches, AudioStreamSynchronized, AudioStreamInteractive, stingers, an
intensity value with hysteresis).
Related skills
godot-audio: Godot players, buses, effects and import settings.
game-feel: the feedback bundles that trigger impact sounds.
game-ui-ux: the settings screen that holds the volume sliders.
Godot 4.7: AudioServer.set_bus_volume_linear, AudioEffectCompressor.sidechain/attack_us/
release_ms, AudioStreamRandomizer, AudioStreamSynchronized (MAX_STREAMS = 32),
AudioStreamInteractive with TRANSITION_FROM_TIME_NEXT_BAR; bpm/bar_beats exist on
AudioStreamOggVorbis and AudioStreamMP3 only (Godot 4.7.2 class reference). Movie Maker
under --headless crashed in a local 4.7.2 test; it worked under xvfb-run.
Unity 6.3 LTS: Audio Random Container assigned via AudioSource.resource; mixer floor -80 dB;
AudioSettings.dspTime with AudioSource.PlayScheduled.
Скачайте skills/disciplines/audio-design/SKILL.md у издателя или скопируйте путь и откройте репозиторий. PlugMCP только показывает навык в каталоге и не хранит файл.
Где находится audio-design?
Издатель хранит его в https://github.com/gamedev-skills/awesome-gamedev-agent-skills.
Какие агенты могут использовать audio-design?
Claude, Cursor, Codex и Grok Build могут читать SKILL.md, который вы добавляете из репозитория издателя. Grok Bot устанавливает его, когда вы отправляете в чат ссылку на папку навыка на GitHub.