TRA (trading research agents) is published as bitra on PyPI and runs as tra. Before
0.10.1 the package was called trading-research-agents, and the same package is still
published under that name.
Language models are good at reading a market and saying what they think. They are bad at
arithmetic, they don't know what a trade costs, and they will happily overrule a limit you set.
This project uses them for the first part only. The system itself, fixed rules with no model
involved, fetches the data and works out every figure. The agents read those figures and give an
opinion. Then the system prices the trade, applies your limits, sizes it, and either writes it
down or sends one order with the stop attached. Every decision and every refusal is kept on disk
with its reason, so you can check afterwards what happened and why.
Read-only gates of autonomous trading agents with deterministic execution: cost, data, validation.
2026-11-08
ดาว
—
เครื่องมือ
—
อัปไทม์
—
It's an early release, so expect settings to change between versions. What works
today: linear perpetuals, spot pairs (stock perpetuals and tokenized stocks among them) and
prediction market outcomes through one order path, a universe of perpetuals found and measured by
the system, a screener that picks where to look, the full autonomous cycle on live data, four analysts and up to three validators, stops and
targets the analyst names inside bounds you set, the gates that decide, sizing from your own rules,
real orders on a venue's practice environment behind a mandate you sign, a risk manager that can
only make the desk more careful, and two auditors that read the records.
Models never compute. Every figure comes from the system, and a figure a model cites is checked against its brief, value included.
Nobody knows what a trade cost until it's done
The round trip (fees, spread, impact, funding, slippage) is priced before an order exists, and a trade whose claimed edge doesn't clear it is refused.
The agent sizes its own position
Size comes from your conviction ladder and your risk limit. No model can make a trade bigger.
A model "decides" to ignore your settings
Your declared thresholds decide. A model's opinion is recorded beside them, never instead of them.
Something went wrong and there is no trace
Each cycle keeps its snapshot, briefs, answers, the intent and what the venue said. Nothing is rewritten.
A crash leaves a position with no stop
The stop and take profit go to the venue with the entry, or right after the fill where the venue takes them no other way, so they survive this process dying.
Text from a feed tells the model what to do
The model that proposes a direction reads numbers code computed; outside text reaches only roles that decide nothing, and no model can send an order or reach a key.
None of these is hypothetical. Why it is built this way
lists the documented failures behind each one, with their sources.
Get started
A few minutes and one model key. Every setting has a working default, so a new desk runs before you
change anything; the table under step 6 says what those defaults are.
1. Install. You need Python 3.11 or newer. uv is the quickest way:
That brings every model provider and every exchange in. Without uv, run
pip install 'bitra[ccxt,openai,anthropic,google,data]' inside a virtual
environment. To move to the newest release later:
name one with --model; tra models <provider> lists them
Add --venue okx (or any ccxt id) to trade somewhere other than Bybit.
3. Add your key. Copy the example file and put your key in it. Every command reads the .env
next to strategy.toml on its own.
cp .env.example .env # then set GROQ_API_KEY=... in .env
4. Check.tra check reads every setting against the others and names the one thing to fix
next. A desk that is ready ends with:
ok provider groq: ready
ready to run `tra run`
5. Run.tra run decides once on live market data, in the sandbox: nothing leaves your
machine. tra run --every 15m keeps deciding, once per fifteen-minute bar, on the clock. Or type
tra on its own for the console, which takes the same commands.
tra run
tra run --every 15m
6. When you want real orders. Start on the exchange's demo or testnet API. Make the desk for
that exchange from the start, and the rest is three commands:
tra init my-desk --profile autonomous --agent groq --venue bitget
cd my-desk # put the exchange's keys in .env beside your model key
tra keys --probe --prepare # reads the account; on a demo or testnet sets one-way mode
tra mandate --sign "Your Name" --venue-mode
tra check
--venue writes what that exchange needs into [execution]: its demo or testnet API, 3x isolated
leverage, at most 200 per order, and how its stop and take profit are placed. Change any of it.
How to make the key on each exchange is in
Exchange accounts and keys, and
Toward real orders has the whole path.
What a new desk does before you change anything
Default
Where to change it
Orders
none: the sandbox writes each decision down and sends nothing
[execution].mode
What it trades
BTCUSDT on Bybit, as a taker
[run].instrument, [universe], --venue
Timeframe
decides on 15-minute bars, reads 1h and 4h as context
[run].bar_interval_s, context_intervals
Strategy
none fixed: the analyst picks the setup the measured regime supports, or stays flat
[agents].mechanism
Stop and target
the analyst names them; the stop is held between 0.2% and 3% and never inside one ATR, the target between 1.5x and 4x the stop
[exit]
Risk per trade
0.5% of equity lost at the stop, whatever the stop's distance
[controls].max_risk_per_trade_bps
Bad days
no new entry after a 3% loss on the day or a 10% fall from the peak
[controls]
Time limit
a position closes after 4 hours
[exit].timeout_bars
Trades worth taking
the edge at least 2x the round trip, break even at half the trades or better, at most 6 a day
[targets]
Oversight
a risk manager that can only cut, pause or halt; two auditors that report
1. The console. Run tra inside your desk and it opens the console: what is ready, what isn't,
and the next command to run. Under it is a prompt that takes every command and draws it right
there. Arrow keys go back through what you typed, tab completes, help lists the commands and
exit leaves. For scripts and cron, tra -c "run --now" runs one command and exits.
2. The pass over your instruments. Type run --every 15m and the desk first refreshes any data
series that are due, one line each. Then it looks at every instrument on your list, one data pull
apiece, and measures it. The screen steps through them live:
3. One cycle per instrument it takes. The system found the candidates and measured them; the screener
chose among them and cited each instrument's own figures; the system's own order is kept beside the
choice. The instruments taken get a full cycle. The terminal shows the whole pipeline from the
start and updates it as each step begins and ends. Steps that run at the same time spin at the same
time, each with its own clock, and the line underneath says who is working right now:
4. The result. When the cycle finishes, the table gives way to the pass over the universe: what the screener took,
what waited and what was held, and why. Then the cycle itself: what the analyst proposed and from
which figures, and every refusal with the number behind it. Here an ETH short in a ranging market
stopped at its exits: with its own stop and target and the round trip, more than half of trades
like it would have had to win just to break even:
Then the data the cycle used and how old it was, the series the reading analysts read, the stop and
take profit it would have placed, and which agents answered. A cycle that goes further adds what
each validator argued, how conviction weighed the analysts, the risk at the stop and the targets:
5. Between cycles. The desk says when the next pass is, on the clock and in minutes, for
example next pass at 14:30:00 UTC, in 10m 57s, and counts down to it. An auditor woken by an alarm
gets a spinner of its own.
The same cycle as plain text (--plain, a pipe or a log), from a real run on live data, shortened:
cycle 2026-09-29T02-59-16Z BTCUSDT: 5.344s of agents, 15.042s of validators
funding ccxt:bybit age 4.267s
ohlcv ccxt:bybit age 32.746s
orderbook ccxt:bybit age 7.544s
macro risk-off: the operator declared a bullish state for US10Y; measured correlation is
neutral (0.0) on a modest sample, weak evidence that does not overturn the declaration
sentiment positive: declared state is bullish, and the measured figures both support it
technical: long on range_reversion at 0.65 over 5 bars: the close is stretched low in the window
read: zscore=-0.587, vwap_gap_bps=-3.99, ret_1_bps=1.59
validator contra oppose on 2 cited figure(s)
validator pro support on 3 cited figure(s)
conviction: 0.800 of 1.0 (macro 1.0, sentiment 0.5, technical 1.300)
risk: 8.29 bps of equity at the stop against the declared 50 bps, size 0.010
cost: 12.87 bps round trip, 2.00 of it estimated
gate: 25.0000 bps claimed clears 12.8723 bps cost plus 0.0000 bps margin
refused targets: the claimed edge is 1.94x the round trip and the desk declared 2.0x;
the cost is certain and the edge is not
That trade was refused. It cleared the cost gate and still died, because this desk asks for an edge
of twice the cost and got 1.94 times. A refusal names the figure behind it, every time.
How one cycle decides
flowchart TD
find[["the system finds the universe and measures each instrument<br/>one data pull each; every value carries its source and age"]] --> wake
wake{"trigger<br/>has anything moved since the last look?"}
wake -- "no" --> held["held: one data pull, no tokens spent"]
wake -- "yes" --> pick["the screener picks among what the system admitted<br/>citing each instrument's own figures"]
pick -- "none taken" --> held
pick -- "taken" --> briefs
briefs["the system writes the briefs<br/>each role sees only the figures its job needs"] --> round1
subgraph round1["asked at the same time"]
direction LR
tech["technical analyst<br/>a direction, a confidence, a horizon"]
macro["macro analyst"]
chain["on-chain analyst"]
mood["sentiment analyst"]
end
round1 --> price["the system prices the round trip<br/>fee, spread, impact, funding, slippage"]
price --> exits{"the stop and the target<br/>the analyst's levels, held inside your bounds<br/>does the trade break even at half its kind winning?"}
exits -- "no" --> refused
exits -- "yes" --> round2["validators, as many as you declare<br/>a claim that cites no figure is thrown away"]
round2 --> matrix{"confluence<br/>do your declared states agree with the direction?"}
matrix -- "no" --> refused["a refusal that names its figure"]
matrix -- "yes" --> size["conviction<br/>how much, from your ladder"]
size --> risk{"risk per trade<br/>what does it lose at the stop?"}
risk --> gate{"cost gate and targets<br/>does the edge clear the cost, by your margin?"}
gate -- "no" --> refused
gate -- "yes" --> intent["the intent, written into the cycle"]
intent --> venue["venue mode only<br/>one order, the stop and take profit attached"]
Who does what:
Role
Reads
Answers
Can never
technical analyst
candles, spread, funding, book imbalance, open interest change, and the regime on its timeframe and the higher ones you declare
a direction, a setup from a fixed list, a confidence, a horizon, and where its stop and target sit
size the trade, place a level outside your [exit] bounds, run a trend setup in a range, or fade a market that is not a measured range
macro analyst
dated rates and levels, dated text
risk-on, risk-off or neutral
propose a direction
on-chain analyst
chain and derivatives figures
accumulation, distribution or neutral
propose a direction
sentiment analyst
dated scores and notes you curate
negative, neutral, positive, or not declared
invent a mood no figure supports
market screener
what the system measured for each admitted instrument: move, spread, regime, volume, correlation to BTC
which instruments to take, in what order, citing their figures
add an instrument the system did not admit
validators: pro and contra
the proposal and the figures behind it, each without the other's case
the strongest case for or against, as cited claims
see the other side's case, or cite a figure it wasn't given
validator: neutral, as judge
the same, and both cases once code has checked every claim
support, oppose or abstain, the one verdict that counts
see the advocates' verdicts, or count claims instead of weighing them
risk manager
what the run recorded: round trips, the losing streak, your limits, the alarm that woke it
continue, cut the size of new entries, pause instruments, or halt, each for a stated number of hours
loosen a limit you set, or add size
technology and quant auditors
the cycles this desk recorded
findings and proposed changes
change anything
The macro, on-chain and sentiment analysts read dated series you declare under sources/. Each one
is either a file you keep or a feed the desk refreshes itself (FRED, the Crypto Fear & Greed Index,
or any paid vendor that answers JSON over https). tra sources show lists every series with where it
came from and how old its last value is, and a value older than its max_age is shown as stale and
never counted. Data sources has the details.
Which validators run is yours to declare. A vote never decides on its own: it moves conviction by
the weight you give it ([conviction].validator_weight), and a stance counts for what it says beyond
its assignment, since a pro that supports is expected to.
Analysts are allowed to disagree. Each one's view becomes a score between -1 and 1, computed from
its own figures against the lines you drew, so a macro reading barely past its line counts as a small
voice and one far past it counts as a big one. Conviction adds them up: agreement grows the size,
opposition shrinks it in proportion, and only opposition that outweighs the case stops the trade. A
short at 0.70 confidence against a barely bullish macro and sentiment scores 0.56 and trades at half
size; against a strongly bullish context it scores 0 and doesn't trade.
The technical analyst knows what kind of market it is working in before it decides. The system measures
the regime on its timeframe (trending up, trending down, ranging or mixed) and on the higher
timeframes you list in [run].context_intervals, and it hands over what your macro thresholds say
this cycle as well. A setup that doesn't fit the regime, such as a trend trade in a sideways
market, is refused by name; [regime] holds the lines.
Everything after the analysts is arithmetic over numbers you declared. No model can place, cancel or
resize an order, read a file outside the project, or edit your configuration. Agents has
the full table of what an agent can reach, and The cycle walks through every step.
Venues
A cycle reaches venues through ccxt, so every exchange ccxt supports is already integrated: the
same order path, the same gates and the same checks, with nothing in the core naming a venue. What
differs from one venue to the next is what ccxt reports it can do, the second column, and how far
it has been tested, the last:
Venue
What a cycle can do there
Practice environment
Run end to end by us
Bybit (the default)
everything: orders with the stop and take profit attached
demo, testnet
yes, on the demo API: real orders, exits attached, a resting order cancelled
OKX
everything
demo (ccxt's testnet switch)
yes, on the demo API: real orders, exits attached, closed by the venue's own exits
Bitget
everything, on a classic or a unified trading account
demo
yes, on the demo API, unified account
BingX
everything
demo (VST, ccxt's testnet switch)
yes, on the demo API
Binance, Gate
orders, with the stop and take profit placed right after the fill (exits = "separate")
dYdX, Paradex, Extended, Lighter (decentralised); Deribit, Crypto.com, Coinbase International
orders, but no exits at the venue through ccxt, and some cannot set leverage
testnet
not for a desk that needs its exits at the venue
Kraken, Kraken Futures, Phemex
data for now: ccxt does not report their positions, and no order is sent into a position nobody can see
"Everything" means ccxt reports the five things a safe order needs: send it, attach the exits, read
the position, read the open orders, cancel. "Run end to end" is the stronger claim, a full run
with real orders on the venue's demo or testnet API, and Bybit, OKX, Bitget, BingX, Binance and Gate
have had it so far. How to make a key on each is in
Exchange accounts and keys. Any other venue that takes orders can have that run at any time: start on its practice environment, watch a
few cycles and read what it sends. Each report moves a venue into the last column.
Adding the venue you trade on is four steps, and one command writes most of it:
tra venues okx # what it can do, and which keys it signs with
tra venues okx --setup # the blocks to paste into envelope.toml, data.toml, strategy.toml and .env
Your fees are filled in from your account when it reports them, and from the venue's standard
tier until then, labelled as such; a fee you write yourself is kept and checked against the account. Venues has the full table, the keys each
venue needs, and the four steps.
Models and providers
You choose the provider and the model; nothing is hard-coded. Each provider reads its key from the
environment (or the .env beside your config) and nowhere else.
Provider
Key in .env
Install with
Structured output
Tested live here
groq
GROQ_API_KEY
openai
JSON schema, falling back to JSON mode; checked by the system
yes: openai/gpt-oss-120b and openai/gpt-oss-20b, every live cycle in our records
google
GEMINI_API_KEY or GOOGLE_API_KEY
google-genai
JSON schema
yes: gemini-flash-latest, as the fallback
anthropic
ANTHROPIC_API_KEY
anthropic
JSON schema
unit-tested; default model claude-opus-5-5
openai
OPENAI_API_KEY
openai
strict JSON schema
unit-tested
deepseek
DEEPSEEK_API_KEY
openai
JSON mode
preset only
mistral
MISTRAL_API_KEY
openai
JSON schema
preset only
xai
XAI_API_KEY
openai
JSON mode
preset only
openrouter
OPENROUTER_API_KEY
openai
JSON mode
preset only
qwen
DASHSCOPE_API_KEY
openai
JSON mode
preset only; pass --base-url for your region
ollama
none
openai
JSON mode
preset only; a local server
local
none
openai
JSON mode
any OpenAI-compatible server; pass --base-url
9router
9ROUTER_API_KEY
openai
JSON schema
preset only; a local router
Whatever the provider, every answer is parsed against a closed schema by the system before anyone reads
it, so a model that only offers JSON mode is held to the same shape as one with strict schemas.
[agents]
provider = "groq"
model = "openai/gpt-oss-120b"
effort = "medium" # minimal | low | medium | high | xhigh | max, where the
# vendor takes it; left out, the vendor's default applies
fallback = ["google:gemini-flash-latest", "anthropic:claude-opus-5-5"]
[agents.roles.sentiment_analyst] # a role that only labels can run on a cheaper model
model = "a-cheaper-model"
effort = "low"
fallback is tried in order when a provider is rate limited or down, with the same brief. A vendor's
free tier meters each model on its own, so roles can share a provider across two models and each
model keeps its own allowance; tra check judges the load per model and says when one is too much. Every
call is a line in usage.jsonl with its tokens and latency, and nothing caps spend unless you
declare a ceiling. tra keys --probe proves each key works without sending a prompt. A vendor of
your own is about thirty lines (Model providers).
Toward real orders
What it trades today, through one order path and the same gates:
Linear perpetuals (USDT- or USDC-margined swaps) on any venue ccxt reaches, long and short,
with the leverage and margin mode you declare. The default, run end to end on six exchanges.
Spot pairs, long only and paid in full, for a desk that lists spot in [execution].markets.
Stock perpetuals and tokenized stocks, which are a perpetual and a spot pair to the venue,
with the underlying exchange's hours respected.
Prediction market outcomes, for a desk that lists prediction, decided on a probability by
their own analyst and priced to resolution.
That is where the project started, not where it stops. For spot, Venues
says how to set a desk up. Spot, a stock perpetual and a tokenized stock have been run on the Bybit
and OKX demos; prediction outcomes have run in sandbox on live data, and their order path is tested
against ccxt's shapes until a practice venue is run. Dated futures, inverse contracts and options are
on the way, each with its own cost model, exit rules and tests. Until a market type has those, venue
mode checks the type on every order and refuses it, because a market the system cannot yet price
and protect is not one it should send to. Boundaries says what each one takes.
An agent desk goes through three steps, and you can stay at any of them as long as you like:
Step
How
What happens
Needs
1. Sandbox
tra run
the full cycle on live data; every decision written down, no order sent
a model key
2. Demo or testnet API
tra run with [execution].mode = "venue" and environment = "demo" or "testnet"
real orders on the exchange's demo or testnet API, exits attached, positions looked after
a signed mandate, a leverage, max_notional, practice keys
3. Real capital
the same, with environment = "mainnet"
real orders with real money
all of the above, plus the ladder at its canary tier (tra ladder promote, with evidence)
Steps 1 and 2 have been run end to end on the demo or testnet APIs of Bybit, OKX, Bitget, BingX,
Binance and Gate. Step 3 has not
been run by us; treat it as yours to verify, small, first.
If you bring a scripted strategy of your own instead of the agents, it has a research path of its
own before any of this: tra data get BTCUSDT 2025-01-01 and tra backtest replay a day of the
exchange's archive net of every cost, tra paper --minutes 30 runs it on the live feed with
nothing sent, and tra live is a small canary session behind hard caps. The example core is there
to show the path, not to make money, and the replay prints its net as it comes out, loss or gain.
The live tier has the details.
Venue mode is the only mode that can lose money, so it has a door in front of it. Read the
mandate with tra mandate; when you accept it, tra mandate --sign "Your Name" keeps it in the
project as MANDATE.md and signs [execution] with your name and today's date, in one step.
Signing alone does not switch anything on; --venue-mode signs and turns orders on together.
tra check names whatever else is missing.
Your money, your orders, your positions
Once orders flow, three things look after the money, all of them the system's own rules and none of them a model:
Before an order
When it is sent
While it is open
the account's real equity and free margin are read
your leverage is applied at the venue and read back
at the start of every pass, each position is checked against the venue
sizing uses the smaller of the real equity and what you allow the desk
an order whose liquidation would sit inside its stop is refused
one that outlives its hold limit is closed with a reduce-only order
an order may use only part of the free margin
a taker entry is a limit IOC within your slippage band, never a naked market order
one the venue's stop or take profit closed is written up with its real fees and funding
a day's loss past your limit stops new entries
the stop and take profit go with the entry, so they outlive this process
the kill switch flattens everything before the desk stops
Who decides what, in one line each: the analysts propose the direction, your risk rule sets the
size, you choose the leverage, and no model touches the last two. Leverage never makes a trade
bigger. It only decides how much margin the trade ties up and how far away liquidation sits.
[execution]
mode = "venue"
environment = "demo" # demo | testnet | mainnet
leverage = 3 # yours to choose; it never makes a trade bigger
max_notional = 400 # the most one order may be worth, in quote currency
margin_mode = "isolated" # isolated | cross
hold_limit = "timeout" # close by time after [exit].timeout_bars; or horizon, or none
Underneath, on every venue: the order goes only to the environment you declared (demo, testnet or
mainnet); an open position or a working order refuses a second entry; a size off the venue's step is
refused rather than rounded; a clock more than a second off the venue's refuses before anything is
signed; and Ctrl-C or a service stop cancels a resting order before the process leaves. Every close
goes to positions.jsonl and every finished trade to round_trips.jsonl. Capital, orders and positions has
every setting, every refusal and the arithmetic behind each one.
One thing to know before you rely on it: the position checks run at the start of each pass of
tra run --every. With no desk running, an open position has its venue-side stop and take profit
and nothing else, so a desk meant to run unattended belongs under a supervisor.
Orders cross the book by default (taker-taker): they always fill, which is how most desks trade.
Point [run].venue_key at a maker-taker channel and entries rest on the book as post-only orders
instead - a lower fee, fewer fills, since a resting order can be left behind by the market. Either
way the cost gate prices the fee of the channel you chose.
Watching a desk, and what is kept
The console runs commands in its own process, so closing it ends what it was running. A desk that
should keep running belongs under a supervisor (systemd, a service manager, tmux), and then you
look at it from anywhere with:
tra watch --every 5s # a read-only view built from the records the desk writes
tra watch opens no connection, holds no key and takes no lock, so opening and closing it does
nothing to the desk.
What is kept, and where:
What
Where
Notes
everything one cycle did
runs/cycles/<id>/
snapshot, briefs, answers, intent, placed.json, cycle.json, and inputs.json.gz with the raw inputs; cycle.json holds a sha256 of each file
the pass over the universe
runs/screens/
every instrument measured, what the screener chose and why
every model call
runs/cycles/usage.jsonl
tokens, latency, price
when the desk ran and what stopped it
runs/cycles/scheduler.jsonl
one line per start and stop
every position closed, by time, by the venue or by the kill switch
runs/cycles/positions.jsonl
venue mode
every finished trade with entry, exit, fees and funding
runs/cycles/round_trips.jsonl
venue mode; what the quant auditor reads
the first equity reading of each day
runs/cycles/equity.jsonl
what the daily loss limit is measured from
what you typed at the prompt
.tra-history
a convenience only; tra -c keeps none
Command line
Every command says what it did. Exit code 0 means cleared, 1 means a gate said no, 2 is a usage
error. --json gives machine-readable output and --plain gives text instead of panels.
Getting started
Command
What it does
tra
opens the console
tra init my-desk --profile autonomous
a project wired for the agents, every file commented
tra check
every setting read against the others, with what to fix
tra keys --probe
proves every key works; no key is printed, no prompt or order sent
tra models groq
the models your key can use on a provider, read from the vendor; no prompt sent
tra init my-desk --profile autonomous --venue okx
a desk wired for one exchange: data, orders, demo or testnet API, keys
tra venues
every venue the docs describe, and what each can do
tra venues okx --setup
what a venue can do, and the blocks to paste to trade on it
tra mandate
the text venue mode requires; --sign "Your Name" keeps it as MANDATE.md and signs [execution] in one step
Running
Command
What it does
tra run
one autonomous cycle
tra run --every 15m --cycles 12
twelve scheduled passes: the first now, then one on every fifteenth minute of the clock
tra run --now
ask the roster even if the trigger would have held a quiet market
tra watch --every 5s
a read-only view of a running desk
tra audit
both auditors over the records; nothing is applied
tra backtest, tra paper, tra live
replay, shadow, canary
Data
Command
What it does
tra data get BTCUSDT 2025-01-01
download a day, verify its checksum, audit it, write Parquet and funding
tra data audit export.csv --mapping mapping.toml
your own CSV or Parquet, through the same audit
tra data pull BTCUSDT
one live snapshot through the chains in data.toml
tra sources show, tra sources pull
where the reading analysts' series come from and how old they are; refresh them now
tra sources add macro us10y --from fred --id DGS10 --high bearish
a series onto the shelf in one step: pulled now, its lines drawn from its own history
tra universe
which perpetuals discovery finds on the venue now, and what each filter took out
tra runs verify
every cycle's files against their hashes, and its briefs against its raw inputs
tra runs prune --keep 90d
what old cycle directories would be removed; add --yes (and --archive) to do it
The ladder, research and hosts
Command
What it does
tra ladder show, promote, demote
which tier the desk stands at; one step up with evidence, or down
the research session, model comparison, a run read back
tra mcp serve
the read-only gates as tools for any MCP host
What it guarantees, and what is not built yet
Some rules are guarantees, enforced by the system and tests, and every change has to keep them:
No model touches an order or a key. Models read figures and answer; the system sizes, prices,
limits and sends.
No model can loosen a control. A model can tighten a limit, step the ladder down or arm the
kill switch; never widen, promote or disarm.
One decision, at most one order. A venue error is recorded and the next cycle decides again;
nothing is retried around real capital.
Stale or missing data is refused, never read as zero or as current.
Other things are simply not built yet, and contributions are welcome: inverse, dated futures and
options; on-chain venues outside ccxt; more than one account; transfers and treasury; routing
and execution algorithms; portfolio accounting. Boundaries lists each one with what it does
today and what a contribution would need. The example strategy cores are examples: your edge is
yours to declare.
Liability says plainly where responsibility sits when real capital is involved.
Where it is going
The project is in active development, and what this page describes is where it stands today, not
where it stops.
More market types. Spot, stock perpetuals, tokenized stocks and prediction markets are
built; inverse and dated futures and options follow, each added with its own cost model, exit rules,
sizing and tests before venue mode accepts it.
More venues run end to end. Every venue ccxt supports already goes through the same order
path and gates. Each one joins the six already in the last column of the venues table after a
full run on its demo or testnet API, ours or yours.
The rest of the not-built-yet list, one piece at a time, without weakening a guarantee.
Use the release. What PyPI installs is the latest release, and it is the version to run.
Releases come from master. The develop branch is where the next release is built: it moves
often, a commit there is not a release, and it can carry work that is unfinished or changed again
before it ships. A set of changes becomes a release when it is merged into master, tagged and
published, and CHANGELOG.md says what each one brought.
Documentation
The full documentation is at docs.bijectivelabs.dev. Its source is in
docs/, so a change in behaviour and the page that describes it go in the same pull request.
git clone https://github.com/BijectiveLabs/bitra && cd bitra
uv sync --all-extras
uv run ruff check . && uv run ruff format --check .
uv run mypy
uv run pytest
CONTRIBUTING.md has the branch flow and the standards the code is held to.
Where it comes from
This repository opened to the public in October 2026. Its history starts on 12 September 2026,
when the code was separated from Bijective's internal work, and every commit, tag and contributor
since then is here. The ideas it is built on are older: the falsification chain, the cost model and
the controls in front of every order come from Bijective's research and from the trading platform
it was building before this repository existed. The language-model agents came later and sit on top
of those gates, which is why they can propose but never size, price or send.
License
MIT. See LICENSE; NOTICE lists the third-party software this package builds on.