- name
SKILL.md
Tệp skill vẫn nằm trong kho mã của nhà phát hành.
Dán lệnh đã sao chép vào terminal. Lệnh sẽ cài đặt tệp SKILL.md này vào agent đó.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-control-motors -a cursor -yDán lệnh đã sao chép vào terminal. Lệnh sẽ cài đặt tệp SKILL.md này vào agent đó.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-control-motors -a claude-code -yDán lệnh đã sao chép vào terminal. Lệnh sẽ cài đặt tệp SKILL.md này vào agent đó.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-control-motors -a codex -yDán lệnh đã sao chép vào terminal. Lệnh sẽ cài đặt tệp SKILL.md này vào agent đó.
npx skills add matlab/simulink-agentic-toolkit --skill simulink-control-motors -a grok -yGửi tin nhắn đã sao chép trong cuộc trò chuyện Grok Bot. Bot sẽ lấy tệp SKILL.md này từ GitHub và thêm vào bộ skill mà mọi Bot của bạn dùng chung.
Install this skill: https://github.com/matlab/simulink-agentic-toolkit/tree/HEAD/skills-catalog/control-systems/simulink-control-motorsTừ nhà phát hành
Build motor control solutions using Motor Control Blockset (MCB): characterize motors, select control algorithms (FOC, DTC, six-step, V/f), compose Simulink models, tune gains, configure sensorless estimation, and generate code for embedded targets.
references/common/COMMON-mcb.md (shared conventions — always load first)references/common/ROUTER-mcb.md for block routing and resolution rulesreferences/configurations/ for non-FOC architectures (DTC, six-step, V/f, BLDC, ACIM)references/common/mcb-examples.md for official MCB example referencesRecommends control strategies, selects patterns, evaluates feature compatibility.
Load: references/design/beginner-path.md for enquiry protocol and learning paths.
references/design/beginner-path.mdreferences/design/application-catalog.md by user's keywords → get Pattern + Featuresreferences/design/composition-rules-combining.mdreferences/design/architecture-patterns.mdCritical rules:
Output: basePattern + features + motorType + controlMode → carry to Building section.
Constructs complete models using wiring topologies, composition rules, and model_edit.
BEFORE using generic wiring tables, check references/configurations/ for a matching file:
If a config file exists: follow it directly. Otherwise: proceed to Step 2.
references/wiring/composition-rules.mdreferences/wiring/composition-rules-infrastructure.mdreferences/wiring/composition-rules-integration.mdControllerParametersSource='internal', ExternalReset='none', InitialConditionSource='internal'ThetaInput='Electrical position', AngleInput='Radians'Key rules:
references/configurations/ FIRSTSets mask parameters for 30+ MCB block types using motor datasheet values.
Reference files:
references/block-config/block-configurations.md — control blocksreferences/plants/block-configurations-plants.md — plant/sensor blocksreferences/block-config/block-configurations-utility.md — utility blocksreferences/block-config/block-configurations-bldc.md — BLDC blocksCritical configurations (must get right):
Key rules:
model_edit configure for setting parametersComputes PI gains, IIR filters, and PU normalization.
Full workflow: references/common/detailed-workflows.md § Tuning Motor FOC Gains
Quick summary: Use mcb.calcFOCGains(pmsm, inverter, Ts, Ts_speed) for all categories except Category A (kt/J > 10,000) which needs manual Ki_speed override. MCB uses Ki×Ts convention — never pass raw Ki.
Reference files: references/tuning/parameter-computation.md, references/shared/gain-formulas.md
Generates and validates LUTs from FEA/measurement data.
Full workflow: references/common/detailed-workflows.md § Importing Nonlinear Motor Data
Quick summary: Use mcb.generateMotorLUT(pmsm, inverter, purpose) with correct purpose string. Validate trefVec symmetry and FluxDTable first row = 0.
Reference files: references/nonlinear-data/pmsmlut-structure.md
Converts between MCB ideal plants, Simscape, and FEM-parameterized models.
Full workflow: references/common/detailed-workflows.md § Building Motor Plant
Quick summary: Solver must change to ode14x for Simscape. Add angle adapter Gain(1/(2*pi)). Gains need re-tuning after plant swap.
Reference files: references/plants/plant-model-converters.md, references/plants/block-configurations-plants.md
Commissioning workflows for Rs, Ld, Lq, FluxPM, J, B.
Full workflow: references/common/detailed-workflows.md § Estimating Motor Parameters
Quick summary: Estimate in order: Rs → Ld/Lq → FluxPM → J/B. Motor must be stationary for Rs and Ld/Lq. Feed results into mcb.calcFOCGains.
Reference files: references/estimation/estimation-procedures.md, references/estimation/estimation-to-tuning.md
Configures I/F startup, SMO, HFI, EEMF observers, and handoff logic.
Full workflow: references/common/detailed-workflows.md § Estimating Sensorless Motor Position
Quick summary: SPM → SMO + I/F. IPM → HFI + SMO hybrid. ACIM → Flux Observer + I/F. Always set SMO PositionUnit='Radians'.
Reference files: references/sensorless/sensorless-blocks.md, references/sensorless/hfi-scheduler.md
Diagnoses errors, oscillations, zero-torque using structured checklists.
Full workflow: references/common/detailed-workflows.md § Diagnosing Motor Control
Quick summary: Identify symptom → run matching checklist → apply fix from auto-fix-recipes → validate. Never rebuild from scratch.
Reference files: references/diagnostics/auto_fix/ERROR_PATTERNS.md, references/diagnostics/auto_fix/auto-fix-recipes.md, references/diagnostics/model-sanity-check.md
Copyright 2026 The MathWorks, Inc.
Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current contr
---name: simulink-control-motorsdescription: Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM…---# skills-catalog/control-systems/simulink-control-motors/SKILL.mdTổng quan
Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current control, and torque control. Configure SVPWM, flux weakening, MTPA, MTPV, control of non-linear motors, inverter control, and motor parameter estimation. Compose motor drive models, tune gains, and generate embedded code.
Câu hỏi thường gặp
Tải skills-catalog/control-systems/simulink-control-motors/SKILL.md từ nhà phát hành, hoặc sao chép đường dẫn và mở kho mã. PlugMCP chỉ liệt kê skill và không lưu trữ tệp này.
Nhà phát hành duy trì nó tại https://github.com/matlab/simulink-agentic-toolkit.
Claude, Cursor, Codex và Grok Build có thể đọc tệp SKILL.md mà bạn thêm từ kho mã của nhà phát hành. Grok Bot cài đặt skill khi bạn gửi liên kết thư mục GitHub của skill trong cuộc trò chuyện.