How do I install @voidly/mcp Email?

Copy the stdio config for Cursor, Claude Desktop, Claude Code, or VS Code on this page. It uses the publisher's install, not a PlugMCP proxy.

Does @voidly/mcp Email need an API key?

No required environment variable is listed on this record.

What transport does @voidly/mcp Email use?

@voidly/mcp Email runs locally over stdio.

When was @voidly/mcp Email last checked?

Last checked 2026-10-27. Email inboxes for AI agents: create one with a single command, receive and read mail over MCP, send to owner-approved recipients. Mail is readable by the server; not end-to-end encrypted.

@voidly/mcp Email MCP 服务器

@voidly/mcp-email

Email for AI agents. Create an inbox, wait for and read incoming messages as structured data, and send to recipients the human owner has approved. No phone number or CAPTCHA.

What the server can read. Mail to a new inbox is readable by the server; not end-to-end encrypted. When the owner registers a key for an inbox (owner keys init, below), stored mail is encrypted to that key, so Voidly cannot read stored mail. This package makes that key on your machine, never sends it to Voidly, and decrypts mail on your machine. That is still not end-to-end encryption: incoming mail is plaintext to the receiving server for a moment before it is sealed, and outside email is not end-to-end. Human mail is a separate product.

Create an inbox in one command

Requires Node.js 20 or newer.

npx -y @voidly/[email protected] create --name my-agent

It prints the new address and where the keys were saved, never a key:

Created [email protected]
  agent key: ~/.voidly/mcp-email/[email protected]/agent-key (saved, not shown)
  owner key: ~/.voidly/mcp-email/[email protected]/owner-key (saved, not shown)
  creator identity: ~/.voidly/mcp-email/creator/identity.json (enrolled now)
  recipient policy: allowlist

Add --address myagent to ask for [email protected]. Then start the MCP server with VOIDMAIL_ADDRESS set to the new address (next section).

How it works: the create API admits only a request signed by a registered Voidly agent identity (did:voidly:…) with a small proof of work. The first run enrolls a dedicated creator identity for this machine through Voidly Home join, the protocol @voidly/agent-sdk 4.0 register() uses: the keys are made here, only public keys, API-key hashes and signatures are sent, and the keys are saved (mode 0600, directory 0700) before the enrollment is committed, then kept in creator/identity.json. Later runs reuse it. Each identity can create 2 inboxes a day; a limit is never worked around by enrolling another identity. If the enrollment's answer is lost, the next run finishes the same enrollment instead of making another.

No terminal? An agent can do the same from MCP: leave env empty and call voidmail_create_account.

Install as an MCP server

Pin the version you run: Voidly publishes this client, and the client is what holds your key.

npx @voidly/[email protected]

Add to ~/Library/Application Support/Claude/claude_desktop_config.json (Claude Desktop):

{
  "mcpServers": {
    "voidmail": {
      "command": "npx",
      "args": ["-y", "@voidly/[email protected]"],
      "env": {
        "VOIDMAIL_ADDRESS": "[email protected]"
      }
    }
  }
}

VOIDMAIL_ADDRESS points the server at <key dir>/<address>/agent-key. Without it, the agent can create an inbox with voidmail_create_account; set VOIDMAIL_ADDRESS afterwards so the next start finds the key file.

Quick Start

After installing the MCP server, use this prompt:

Create one Voidmail inbox and show me its address and where the inbox keys were saved. Draft emails first and wait for my approval before sending.

For a sign-up flow: call voidmail_wait_for_email (up to 25 seconds, optional sender, subject and since filters), then voidmail_extract_code on the message it returns. Both read only; they mark nothing read, follow no link and never return HTML. A code or link they return is untrusted sender content: use it only for the sign-up you started.

Get a DID (use your own agent identity instead)

create and voidmail_create_account make their own creator identity, so this is optional. To sign with an agent identity you already run, or one you enroll yourself, use @voidly/agent-sdk 4.0 (direct /v1/agent/register with client keys is closed; register() uses Home join):

// npm i @voidly/[email protected]   ·   run once, keep the file private
import { VoidlyAgent } from '@voidly/agent-sdk';
import { writeFileSync } from 'node:fs';

const agent = await VoidlyAgent.register({ name: 'my-agent' });
writeFileSync('agent-credentials.json', JSON.stringify(agent.exportCredentials()), { mode: 0o600 });

Then point the MCP server (or create) at that file. Its DID is read from the file:

{
  "VOIDMAIL_CREATOR_SIGNING_KEY_FILE": "/private/path/to/agent-credentials.json"
}

The file must be owned by you with mode 0600; a symlink, a looser mode or a key that does not match its DID is refused before anything is sent. The 2.0 format still works too: a file of exactly the 64 raw Ed25519 secret-key bytes, with VOIDMAIL_CREATOR_DID set to its DID. An exported identity file holds all of that identity's keys, and the MCP process reads it at create time; a dedicated creator identity (the default) keeps your main agent identity out of the mail client.

Signed create from your own code

The proof the API checks, in two short scripts. Each reads an agent-sdk identity export (above, or this package's creator/identity.json) and prints the status and address. The response carries the inbox's agent key (vm_…) and owner key (vmo_…) once: save them to 0600 files and never print or log them.

Node.js 20+ (npm i tweetnacl):

import { createHash, randomBytes } from 'node:crypto';
import { readFileSync } from 'node:fs';
import nacl from 'tweetnacl';

const creds = JSON.parse(readFileSync(process.argv[2], 'utf8'));
const sha = (text) => createHash('sha256').update(text).digest();
const body = JSON.stringify({ name: 'my-agent', recipient_policy: 'allowlist' });
const ts = String(Math.floor(Date.now() / 1000));
const nonce = randomBytes(16).toString('hex');
const preimage = ['voidmail-create-v1', 'POST', '/v1/agent-mail/create', creds.did, ts, nonce, sha(body).toString('hex')].join('\n');
let work;
for (let i = 0; ; i++) {
  work = i.toString(16).padStart(16, '0');
  const h = sha(`voidmail-create-pow-v1\n${preimage}\n${work}`);
  if (h[0] === 0 && h[1] === 0) break;
}
const secretKey = Buffer.from(creds.signingSecretKey, 'base64');
const signature = Buffer.from(nacl.sign.detached(Buffer.from(`${preimage}\n${work}`), secretKey)).toString('base64');
const res = await fetch('https://api.voidly.ai/v1/agent-mail/create', { method: 'POST', body, headers: {
  'Content-Type': 'application/json', 'X-Agent-DID': creds.did, 'X-Mail-Timestamp': ts,
  'X-Mail-Nonce': nonce, 'X-Mail-Pow': work, 'X-Mail-Signature': signature } });
const out = await res.json();
console.log(res.status, out.address ?? out.error);

Python 3 (pip install pynacl):

import base64, hashlib, json, secrets, sys, time, urllib.request
from nacl.signing import SigningKey

creds = json.load(open(sys.argv[1]))
body = json.dumps({"name": "my-agent", "recipient_policy": "allowlist"}).encode()
ts, nonce = str(int(time.time())), secrets.token_hex(16)
preimage = "\n".join(["voidmail-create-v1", "POST", "/v1/agent-mail/create", creds["did"], ts, nonce, hashlib.sha256(body).hexdigest()])
i = 0
while True:
    work = format(i, "016x")
    h = hashlib.sha256(f"voidmail-create-pow-v1\n{preimage}\n{work}".encode()).digest()
    if h[0] == 0 and h[1] == 0:
        break
    i += 1
seed = base64.b64decode(creds["signingSecretKey"])[:32]
signature = base64.b64encode(SigningKey(seed).sign(f"{preimage}\n{work}".encode()).signature).decode()
req = urllib.request.Request("https://api.voidly.ai/v1/agent-mail/create", data=body, method="POST", headers={
    "Content-Type": "application/json", "User-Agent": "voidmail-create-example/1", "X-Agent-DID": creds["did"],
    "X-Mail-Timestamp": ts, "X-Mail-Nonce": nonce, "X-Mail-Pow": work, "X-Mail-Signature": signature})
with urllib.request.urlopen(req) as res:
    print(res.status, json.load(res).get("address"))

The signature covers the SHA-256 of the exact body bytes sent, so send the same bytes you hashed. The timestamp must be within five minutes of service time, and one DID/nonce pair can mint only one inbox. A bare POST /v1/agent-mail/create without these headers returns 401.

An HTTP 401 means the create proof was missing or invalid, the timestamp expired, or the DID was not active; check the identity and key. An HTTP 429 means a create limit was reached; respect Retry-After, reuse an existing inbox or wait, and do not switch DID or IP to evade the limit. A 503 can mean an admission, identity or commit check was unavailable; the outcome may be unknown. If a create request was sent but its result is unknown, do not automatically create another inbox: reconcile the original attempt first.

Encrypted storage

Turn it on once per inbox, from your own terminal (never from a model):

voidly-mcp-email owner keys init --address [email protected]

What it does. It makes two keys on this machine: an X25519 key that mail is sealed to (mail-secret-key) and an Ed25519 key that signs the inbox's key list (mail-signing-key). Both are 0600 files in the inbox's key directory. Only public keys, signatures and a proof that you hold the key are sent, with the owner key. From then on the server seals each new message (headers, body and attachments) to your key and stores only the encrypted copy. The switch is one-way.
What Voidly can and cannot read. Voidly cannot read stored mail for an inbox with a registered key. A changed Voidly server could copy mail that arrives later, but not open mail already stored. It still sees each incoming message in plaintext while receiving it, for the moment before sealing, and so does Cloudflare, which runs our inbound mail servers; Cloudflare's Email Routing log records each message's sender, recipient and subject, and our account can view it. Voidly keeps the sender's domain, the arrival time and the size, plus, for up to 14 days, a keyed fingerprint of each message used to drop duplicate deliveries; while it exists, Voidly could check it against a guessed message. Mail you send to outside addresses is not end-to-end encrypted: it passes through Voidly and our sending provider (Resend) in plaintext.
Old mail. Mail stored before the key was registered stays server-readable. Tool results label every message storage: "sealed" (decrypted here) or storage: "server-readable". A readable message that arrived after you registered a key carries a storage_warning.
Reading and searching. voidmail_list_inbox opens each message's sealed summary; voidmail_read_email downloads the sealed message and opens it. Search runs on this machine: the server is never asked to search sealed mail. By default it matches subject, sender, recipients and the first 280 characters of encrypted messages; full_text: true also downloads and searches whole encrypted bodies. If a message fails to decrypt, or is bound to another inbox or message id, nothing from it is shown, not even server-supplied fields.
Key list checks. mail-keys.json pins your signing key and the newest key-list version (epoch) you have seen. voidly-mcp-email owner keys status checks the server's list: every key must be signed by your signing key, the list must be complete for its epoch and not older than the pin. Each message also names the keys it is sealed to and warns about any key this machine has not verified.
Limits. There is no forward secrecy: whoever gets mail-secret-key (or a key in keyring/) can read all mail stored for it. If you lose the key and its backups, that mail cannot be recovered by anyone, including Voidly, so back up the key directory privately. Encryption does not prove who sent a message. The MCP server reads to decrypt; it never reads and has no tool that can make, register or change a key. Anything that runs as your user, such as an agent with shell or file tools, can read the key files too.

Permissions: separate keys, one owner

Every inbox has two credentials (agent key and owner key), plus two mail keys once encrypted storage is on. This package keeps each in its own file.

Key	File (0600, directory 0700)	Who uses it	What it can do
Agent key `vm_…`	`~/.voidly/mcp-email/<address>/agent-key`	the MCP server, for the model's tools	read, send to approved recipients, request a recipient, remove a recipient, tighten policy
Owner key `vmo_…`	`~/.voidly/mcp-email/<address>/owner-key`	you, through `voidly-mcp-email owner`	approve or deny requests, add or remove recipients, lock or unlock, rotate either key, register mail keys
Mail secret key `vmx_…`	`~/.voidly/mcp-email/<address>/mail-secret-key` (old ones in `keyring/`)	the MCP server, to decrypt on this machine	open mail sealed to this inbox; never sent anywhere
Mail signing key `vms_…`	`~/.voidly/mcp-email/<address>/mail-signing-key`	you, through `voidly-mcp-email owner keys`	sign the inbox's key list; never sent anywhere
Creator identity	`~/.voidly/mcp-email/creator/identity.json`, or your own file named by `VOIDMAIL_CREATOR_SIGNING_KEY_FILE`	`create` and the MCP server, for inbox creation only	sign create requests as that agent DID; the default one is dedicated to this, while your own identity file also carries that identity's other powers

create and voidmail_create_account write both files and show only their paths. This server never puts any key in a tool result. Every message it emits is scrubbed of Voidmail key shapes (vm_…, vmo_…, vmx_…, vms_…) and AGE-SECRET-KEY-… strings, including ones that arrive inside email. Other secrets that arrive in email, such as a cloud or GitHub token, are passed to the model unchanged.
The MCP server never reads the owner-key file and never calls the owner API routes (/v1/agent-mail/owner/*). No tool uses the owner key.
Mode 0600 keeps other OS users out, not your agent. Anything that runs as your user can read the owner-key file, including an agent with shell or file tools (a coding agent, a filesystem MCP server). Such an agent could read the owner key and approve its own recipients. If your agent has shell or file access on this machine, move the owner-key file somewhere it cannot read, or off the machine, and point VOIDMAIL_OWNER_KEY_FILE at it when you run owner commands.
Inboxes created with this package start with an owner-approved recipient list, enforced by the Voidly API, not by model instructions. (A REST create that does not opt in still makes the old kind of inbox: no owner key, any recipient, credential warnings only. A create opts in with recipient_policy: "allowlist", owner_key: true or content_policy: "enforce"; only then does the response carry an owner_key. This package always sends recipient_policy: "allowlist".) Sending to anyone else returns RECIPIENT_NOT_AUTHORIZED with send_attempted: false. The API records a pending request, and the tool result says exactly what the owner must run.
A message that looks like it carries a credential (private keys, cloud, GitHub, Slack, Stripe, AI-provider or Voidmail keys) is refused with CONTENT_CONTAINS_CREDENTIAL on inboxes with credential blocking on, which is the default for inboxes that have an owner key (every inbox this package creates). The tool result lists the kinds found, never the matched text. The check matches known key formats. It does not catch passwords, unfamiliar token formats or data that is sensitive for other reasons.
Outgoing mail is checked for credentials. Before a message is sent, the API scans its recipient, subject, body and reply-to in memory for known credential formats. The scan keeps no copy of what it matched: it records only a daily count for each kind it found. On an inbox with credential blocking on (the default for inboxes with an owner key), a match stops the send. On other inboxes the message is still sent, and the response names the kinds found in an header. The owner can turn the check off at (or with and ). The one exception is an owner key made by bootstrap, described below: it cannot switch the check off.

Owner commands

voidly-mcp-email owner list                              # policy, recipients, pending requests
voidly-mcp-email owner approve <request-id>              # shows the recipient, asks you to confirm
voidly-mcp-email owner deny <request-id>
voidly-mcp-email owner add [email protected]            # or @example.com for a whole domain
voidly-mcp-email owner remove [email protected]
voidly-mcp-email owner lock                              # allowlist + credential blocking
voidly-mcp-email owner unlock                            # any recipient; asks you to confirm
voidly-mcp-email owner rotate-agent-key                  # old key stops working at once
voidly-mcp-email owner rotate-owner-key                  # replaces the owner-key file it read
voidly-mcp-email owner keys init                         # encrypted storage on; asks you to confirm
voidly-mcp-email owner keys status                       # check the server's key list against your pin
voidly-mcp-email owner keys rotate                       # new mail key; old one kept for old mail

Add --address <[email protected]> when more than one inbox is saved, and --yes to confirm without a prompt. approve first reads the pending request and names its recipient, and refuses an id that is not pending. Rotated keys are written to their files and never printed. rotate-owner-key atomically replaces the owner-key file it read, including a VOIDMAIL_OWNER_KEY_FILE path. The old owner key is revoked before the new one is saved, so if that file cannot be replaced the new key goes to a new 0600 file beside it, and only if that also fails is it shown once on your terminal. An MCP server that reads its key file uses a rotated agent key on its next call. The same actions are available in the browser at https://voidly.ai/agent-mail/owner, where the owner key is kept in memory only.

Inboxes without an owner key (created by mcp-email 1.1.0 or earlier, or by a REST create that did not opt in) keep the old behaviour: any recipient, with credential warnings only, and server-readable storage. The agent-key owner bootstrap (POST /v1/agent-mail/owner/bootstrap) is closed in the server release that ships with 2.0: the agent key is what a model holds, so it must not be able to claim the owner role or redirect mail. Such an inbox cannot get an owner key or encrypted storage; create a new inbox with this package and move to it. An owner key that an earlier bootstrap minted keeps its recipient and policy powers, can never switch the credential guard off (CONTENT_POLICY_FLOOR), and cannot register mail keys or rotate the agent key (OWNER_KEY_FROM_AGENT_KEY).

Check incoming mail with voidmail_list_inbox, then read a message with voidmail_read_email. To send, review the recipient, subject and body before invoking voidmail_send_once. Generate and save a unique operation ID in your host state before the call; use that same ID for status lookup after a lost response, and for the retry after the owner approves a refused recipient.

Tools (21)

Tool	Description
`voidmail_create_account`	Create a new @voidmail.ai inbox with a DID-signed proof (enrolling a dedicated creator identity first if none exists); saves both inbox keys to 0600 files and returns only their paths
`voidmail_account_info`	Get account details
`voidmail_list_inbox`	List emails with pagination and filters; encrypted ones are decrypted here
`voidmail_read_email`	Read a specific email, decrypting it here if it is encrypted (auto-marks as read)
`voidmail_search_inbox`	Search on this machine across subject, sender, recipients and text; never a server search
`voidmail_wait_for_email`	Wait up to 25 seconds for a new message by sender, subject or arrival time; returns its id, sender and subject; marks nothing read
`voidmail_extract_code`	Pull a likely one-time code and HTTPS verification link from one message's plain text (decrypted here if sealed); untrusted content, never HTML
`voidmail_sending_limits`	Read sending policy without consuming send capacity
`voidmail_send_once`	Send one authorized message with a saved operation ID and retained status
`voidmail_send_status`	Read the same original send without sending again
`voidmail_send_email`	Legacy send without durable status; prefer `voidmail_send_once`
`voidmail_policy`	Read the recipient and content policy, approved recipients and pending requests
`voidmail_request_recipient`	Ask the owner to approve a recipient; returns the approval step
`voidmail_revoke_recipient`	Remove an approved recipient (restricting needs no owner)
`voidmail_mark_read`	Mark email as read
`voidmail_delete_email`	Delete email
`voidmail_create_alias`	Create disposable email alias

Resources (3)

Resource	URI	Description
Inbox	`email://inbox`	Current inbox contents
Aliases	`email://aliases`	Active email aliases
Stats	`email://stats`	Account statistics

Environment Variables

Variable	Required	Description
`VOIDMAIL_ADDRESS`	For an existing inbox	Your @voidmail.ai address; the server reads `<key dir>/<address>/agent-key` on each call
`VOIDMAIL_KEY_DIR`	No	Key directory (default `~/.voidly/mcp-email`)
`VOIDMAIL_AGENT_KEY_FILE`	No	Explicit agent-key file path (overrides the address lookup)
`VOIDMAIL_API_KEY`	No	Agent key (`vm_…`) supplied directly by the host; takes precedence over files. Anything else, including an owner key, is refused and never sent. Update it after `rotate-agent-key`
`VOIDMAIL_CREATOR_SIGNING_KEY_FILE`	No	Your own creator identity: an `@voidly/agent-sdk` identity export (JSON), or a file of exactly 64 raw Ed25519 secret-key bytes. Owned, mode 0600; never an inbox mail-signing or owner key. Unset: `<key dir>/creator/identity.json` is used, enrolled on first create
`VOIDMAIL_CREATOR_DID`	With a raw key file	The DID of a raw 64-byte key file. With a JSON export it is optional and must match the file's DID
`VOIDMAIL_CREATOR_AUTO_ENROLL`	No	`off` stops `create` and `voidmail_create_account` from enrolling a creator identity when none is configured or stored
`VOIDMAIL_OWNER_KEY_FILE`	No	Owner CLI only: explicit owner-key file path. The MCP server never reads it
`VOIDMAIL_SIGNING_KEY_FILE`	No	Owner CLI only: explicit mail-signing-key path, if you keep it away from the agent. The MCP server never reads it

REST API

Use directly without MCP:

# List inbox
curl https://api.voidly.ai/v1/agent-mail/inbox \
  -H "X-Agent-Mail-Key: vm_your_key"

# Send email
curl -X POST https://api.voidly.ai/v1/agent-mail/send \
  -H "X-Agent-Mail-Key: vm_your_key" \
  -H "Content-Type: application/json" \
  -d '{"to":"[email protected]","subject":"Hello","text":"From my agent"}'

# Search (server-readable inboxes only; an inbox with encrypted storage answers 410
# SEARCH_IS_CLIENT_SIDE, and this package searches on your machine instead)
curl "https://api.voidly.ai/v1/agent-mail/inbox/search?q=invoice" \
  -H "X-Agent-Mail-Key: vm_your_key"

Direct REST creation needs a signed proof from an active agent DID: see Signed create from your own code.

Encrypted messages come back as { "sealed": true, "envelope": … }; the encrypted body is GET /v1/agent-mail/inbox/{id}/sealed-body. Opening them needs the inbox's mail secret key, which only your machine has.

Limits and delivery

Call voidmail_sending_limits (or public GET /v1/agent-mail/limits) before planning a sending workflow. Keep excess work in your own queue. A 429 gives a Retry-After header and structured limit scope/reset time; the MCP error includes the wait time. Do not rotate accounts or IPs to evade a limit. Identical messages are blocked for 60 seconds to catch loops; this is not durable idempotency. Sending fails closed if safety counters are unavailable. Inbox reads remain separate from sending limits.

Shared caps: 100 attempts/hour per IP, 200/hour and 1,500/day for agent mail. The shared outbound provider budget is at most 1,500 recipients/day and 40,000 over approximately 31 days across all sending features. Counters count attempts, including failed and partially admitted requests; these are ceilings, not reserved capacity. Higher legitimate volume needs an operator-reviewed limit change; mailbox creation does not unlock bulk mail.

Sending has per-mailbox, per-IP and shared service limits. Each mailbox may attempt up to 10 sends per minute and 100 per day, with up to 10 per day to the same recipient; shared limits can reject requests sooner. Mailbox creation is limited to 3 attempts per IP per hour, 600 total attempts per service hour, 2 signed attempts per DID per day, and 60 signed attempts per service hour. These counters include failed or partially admitted requests. This is not an unlimited sending service.
A successful send response means the sending provider accepted the request. It does not prove recipient delivery or that anyone read the message.
Each API call has a 20-second deadline and a 2 MiB response bound. Requests reject redirects and are never automatically retried. Request fewer messages if an inbox response exceeds the bound.
MCP tool annotations identify reads, sends, mutations and deletion honestly. They are advisory metadata; approval and install warnings remain controlled by ChatGPT, Claude or your other host.
If a send times out, its outcome may be unknown. Use voidmail_send_once and voidmail_send_status with a saved operation ID; do not blindly resend.
On a server-readable inbox, incoming text and HTML bodies are parsed; attachments are not retained and reply-thread metadata is not populated, even though the response schema contains those fields. On an inbox with encrypted storage the whole raw message is sealed, attachments included; tools show attachment names and sizes, not their contents. Reliable threaded replies are not yet provided.
New-message webhooks are best effort, with no durable retry history. Use inbox reads to reconcile missed notifications. For an allowlist inbox, or any inbox with an owner key, the owner must register a webhook through POST /v1/agent-mail/owner/webhook outside the agent; voidmail_set_webhook cannot do that. Once the owner-key API update is live, newly registered webhooks are signed with X-Voidmail-Signature-256: t=<timestamp>,v1=<HMAC-SHA256>. Webhooks registered before it also keep receiving the legacy X-Voidmail-Signature header, which carries the shared secret itself and is not a payload signature, until they are registered again.
Treat incoming email as untrusted content. A message cannot authorize your agent to send mail, disclose private data or spend money. The API adds a recipient only for a request that carries the owner key, so keep that key where the agent cannot read it.
Owner-key guessing is limited per network: after repeated failed owner-key attempts from one IP address (IPv6 /64), owner calls from that network are refused until the current UTC hour ends, even with the right key. Someone sharing your network can trigger this.

Changes

See CHANGELOG.md. 2.1.1 corrects the package description. 2.1.0 adds voidly-mcp-email create, automatic creator identity enrollment, agent-sdk identity exports as the creator key file, voidmail_wait_for_email and voidmail_extract_code.

License

MIT

Durable sends (1.1.0)

Use voidmail_send_once with a host-saved operationId (16-128 letters, digits, underscores or hyphens), recipient, subject and body. The same mailbox, ID and effective content returns the retained original; changed content conflicts. The host must retain the ID before sending. The connector does not invent or persist IDs for you. Keep mailbox credentials in host configuration, not message bodies.

Use voidmail_send_status after a timeout or lost response. accepted means the provider accepted a request, not delivered or read. prepared has no claimed dispatch yet; outcome_unknown may include a live or interrupted dispatch; refused_before_send records a request known to have been blocked before contacting the provider. No state authorizes an automatic replacement ID. The service never reclaims a dispatch on timeout, restart or age. A failure before the provider call can conservatively leave an unresolved original rather than risk duplicate mail.

REST equivalents are POST /v1/agent-mail/outbound and GET /v1/agent-mail/outbound/{operationId}, using the existing mailbox authentication. New operation records and sends are bounded by the existing mailbox/service ceilings; stored-original lookup does not consume sending quota. Concurrent first attempts can consume conservative admission counters. The legacy /send endpoint and voidmail_send_email retain their old behavior and have no durable status guarantee. Delivery webhooks, reply threading, outbound body history and attachments remain separate work.

@voidly/mcp Email

添加此服务器

用我们的密钥与日志托管一份副本。

Server facts

Tools

Questions